Laserfiche WebLink
AFL INDUSTRIES,INC. <br /> RIVIERA BEACH,FLORIDA <br /> SERVICE OPERATION Page 3 OF 4 <br /> MANUAL PRINCIPLE <br /> PRODUCT: VERTICAL TUBE COALESCING ISSUED <br /> SEPARATOR-ALL MODELS JAN '83 <br /> OIL RETENTION BAFFLE <br /> The oil retention baffle blocks the flow of oil which has risen to the surface while allowing the water to pass beneath. <br /> ROTARY PIPE SKIMMER <br /> The unit is provided with a rotary pipe skimmer to skim off the accumulated oil in the separating chamber,see separate <br /> instruction manual contained in this brochure. <br /> SHEEN BAFFLE <br /> The sheen baffle is designed to capture small oil droplets that might pass under the oil retention baffle. The buildup of oil at <br /> the baffle is so slow that no skimming device is required. <br /> WEIR WALL AND PLATE <br /> The static water level,which occurs when there is no water flowing through the separator,is determined by the Weir Wall. <br /> This level can be adjusted by raising the Effluent Weir Plate.Once the elevation is established,the flow through the <br /> separator may be very closely established by measuring,in inches,the differential between the water level and top of the <br /> weir plate or the"head" see Fig.2.0.Once the"head" is established,the flows through the unit can be calculated by using <br /> Table 1.0 on the following page. <br /> Oil removal rates can be increased or decreased by adjusting the Effluent Weir Plate. <br /> OUTLET <br /> Clarified water exits the separator through a"T" pipe which allows it to exit through the bottom of the pipe only. <br /> SUPERSEDES: 1-0-M: 2.00-1 <br />