Laserfiche WebLink
ALS Group, USA Date:07-Jun-21 <br /> Oualifier Description <br /> * Value exceeds Regulatory Limit <br /> ** Estimated Value <br /> a Analyte is non-accredited <br /> B Analyte detected in the associated Method Blank above the Reporting Limit <br /> E Value above quantitation range <br /> H Analyzed outside of Holding Time <br /> Hr BOD/CBOD-Sample was reset outside Hold Time,value should be considered estimated. <br /> J Analyte is present at an estimated concentration between the MDL and Report Limit <br /> ND Not Detected at the Reporting Limit <br /> O Sample amount is>4 times amount spiked <br /> P Dual Column results percent difference>40% <br /> R RPD above laboratory control limit <br /> S Spike Recovery outside laboratory control limits <br /> U Analyzed but not detected above the MDL <br /> X Analyte was detected in the Method Blank between the MDL and Reporting Limit,sample results may exhibit background or <br /> reagent contamination at the observed level. <br /> Acronym Description <br /> DUP Method Duplicate <br /> LCS Laboratory Control Sample <br /> LCSD Laboratory Control Sample Duplicate <br /> LOD Limit of Detection(see MDL) <br /> LOQ Limit of Quantitation(see PQL) <br /> MBLK Method Blank <br /> MDL Method Detection Limit <br /> MS Matrix Spike <br /> MSD Matrix Spike Duplicate <br /> PQL Practical Quantitation Limit <br /> RPD Relative Percent Difference <br /> TDL Target Detection Limit <br /> TNTC Too Numerous To Count <br /> A APHA Standard Methods <br /> D ASTM <br /> E EPA <br /> SW SW-846 Update III <br /> Units Reported Descriution <br /> %of sample Percent of Sample <br /> °F Degrees Fahrenheit <br /> mg/Kg-dry Milligrams per Kilogram Dry Weight <br /> QF Page I of I <br />