2021-06-24_REVISION - M2012032 - Laserfiche WebLink

Home Browse Search

ASME B31.3-2016 MA314 THREADED JOINTS MA323.4.3 Nonmetallic Lining Materials. MA314.1 General Paragraph A323.4.3 applies with the additional require- ment that where a material in para. A323.4.2 is used as Threaded joints shall not be used. a lining that also serves as a gasket or as part of the flange facing, consideration shall be given to design of MA315 TUBING JOINTS IN NONMETALLIC PIPING the flanged joint to prevent leakage to the environment. Paragraph A315 applies in its entirety. PART 18 STANDARDS FOR NONMETALLIC AND MA316 CAULKED JOINTS NONMETALLIC LINED PIPING COMPONENTS Caulked joints shall not be used. MA326 DIMENSIONS AND RATINGS OF COMPONENTS MA318 SPECIAL JOINTS Paragraph A326 applies in its entirety. Table A326.1 Paragraph A318 applies in its entirety applies,except for components and systems prohibited or restricted elsewhere in this Chapter. PART 15 FLEXIBILITY AND SUPPORT OF NONMETALLIC PART 19 PIPING FABRICATION, ASSEMBLY, AND ERECTION OF NONMETALLIC AND NONMETALLIC LINED PIPING MA319 PIPING FLEXIBILITY MA327 GENERAL Paragraph A319 applies in its entirety. Paragraph A327 applies in its entirety. MA321 PIPING SUPPORT MA328 BONDING OF PLASTICS Paragraph A321 applies in its entirety. Paragraph A328 applies in its entirety. PART 16 NONMETALLIC AND NONMETALLIC LINED SYSTEMS MA329 FABRICATION OF PIPING LINED WITH MA322 SPECIFIC PIPING SYSTEMS NONMETALS Paragraph A329 applies in its entirety. Paragraph A322 applies in its entirety. MA332 BENDING AND FORMING PART 17 NONMETALLIC MATERIALS Paragraph A332 applies in its entirety. MA323 GENERAL REQUIREMENTS MA334 JOINING NONPLASTIC PIPING Paragraph A323.1 applies with the additional require- ment described in para. MA323.1.2. Paragraph A323.2 Paragraph A334 applies in its entirety applies in its entirety. See para. MA323.4. MA323.1.2 Unlisted Materials. Paragraph 323.1.2 MA335 ASSEMBLY AND ERECTION applies with the additional requirement that the Paragraph A335 applies in its entirety designer shall fully document the determination of allowable stresses as part of the engineering design. PART 20 MA323.4 Fluid Service Requirements for Nonmetallic INSPECTION, EXAMINATION, TESTING, AND Materials RECORDS OF NONMETALLIC AND NONMETALLIC Paragraph A323.4.1 applies.See paras.MA323.4.2 and LINED PIPING MA323.4.3. MA340 INSPECTION MA323.4.2 Specific Requirements. Paragraph Paragraph 340 applies in its entirety. A323.4.2 applies, except that materials listed under paras. A323.4.2(a), (b), and (d) may be used only as MA341 EXAMINATION linings.Thermoplastics may be used as gaskets in accor- dance with paras. M325.1 and MA323.4.3. Paragraph A341 applies in its entirety.