Laserfiche WebLink
Colorado Legacy Land Former Schwartzwalder Mine <br /> North Waste Rock Pile Diversion Channel <br /> SECTION 013300 <br /> SUBMITTALS <br /> PART 1 - GENERAL <br /> 1.01 Summary <br /> A. This section includes definitions, descriptions,transmittal,and review of submittals <br /> identified in all Sections of these Specifications. <br /> 1.02 Related Work Specified Elsewhere <br /> Not used <br /> 1.03 General Information <br /> A. Definitions: <br /> 1. Shop Drawings and product data are technical submittals prepared by Contractor, <br /> Subcontractor,manufacturer, or Supplier and submitted by Contractor to <br /> Engineer as a basis for approval of the use of equipment and materials proposed <br /> for incorporation in the Work or needed to describe installation, operation, <br /> maintenance, or technical properties,as specified in each Division of the <br /> Specification section. <br /> a. Shop Drawings include custom-prepared data of all types including <br /> drawings, diagrams,performance curves,material schedules,templates, <br /> instructions, and similar information not in standard printed form <br /> applicable to other projects. <br /> b. Product data includes standard printed information on materials, <br /> products, and systems not custom-prepared for this Project, other than <br /> the designation of selections from available choices. <br /> 2. Informational submittals are those technical reports, administrative Submittals, <br /> certificates, and guarantees not defined as Shop Drawings or product data. <br /> a. Technical reports include laboratory reports,tests,technical procedures, <br /> technical records, and Contractor's design analysis. <br /> b. Administrative Submittals are those nontechnical Submittals required by <br /> the Contract Documents or deemed necessary for administrative records. <br /> These Submittals include maintenance agreements,Bonds,physical work <br /> records, statements of applicability,Project record data, schedules, and <br /> similar type Submittals. <br /> B. Quality Requirements: <br /> 1. Submittals such as Shop Drawings and product data shall be of suitable quality <br /> for legibility and reproduction purposes. Every line, character, and letter shall be <br /> Section 013300-Submittals Page 1 <br />