Laserfiche WebLink
41—Kerber loamy sand <br /> Map Unit Setting <br /> National map unit symbol:jqpt <br /> Elevation.7,600 to 7,800 feet <br /> Farmland classification: Not prime farmland <br /> Map Unit Composition <br /> Kerber and similar soils. 100 percent <br /> Estimates are based on observations, descriptions, and transects of the mapunit. <br /> Description of Kerber Setting <br /> Landform: Flood plains on valley floors,fans on valley floors <br /> Down-slope shape: Linear <br /> Across-slope shape: Linear <br /> Parent material:Alluvium derived from basalt <br /> Typical profile <br /> H1 -0 to 8 inches:loamy sand H2- 8 to 27 inches.sandy loam H3-27 to 60 inches:sand <br /> Properties and qualities <br /> Slope:0 to 1 percent <br /> Depth to restrictive feature.More than 80 inches Drainage class. Somewhat poorly drained Runoff class: <br /> Very low <br /> Capacity of the most limiting layer to transmit water(Ksat).Moderately high to high (0.60 to 6.00 in/hr) <br /> Depth to water table:About 24 to 36 inches <br /> Frequency of flooding: None <br /> Frequency of ponding. None <br /> Calcium carbonate, maximum content:15 percent <br /> Maximum salinity: Moderately saline to strongly saline (8.0 to 16.0 mmhos/cm) <br /> Sodium adsorption ratio, maximum.50.0 <br /> Available water capacity. Low(about 4.1 inches) <br /> Interpretive groups <br /> Land capability classification (irrigated).7s Land capability classification (nonirrigated):7s Hydrologic Soil <br /> Group: B <br /> Ecological site:R051 XY263CO- Salt Flats <br /> Hydric soil rating: No <br /> Minor Components <br /> Other soils <br /> Percent of map unit: <br /> Hydric soil rating: No <br /> -I'IL'SlIC S07/ 1_4 (,ram l.ew ir4r aiaU�sKncialtx,1'L!.( <br /> November 2020 ------ <br />