Laserfiche WebLink
Case 1:20-bk-12043 Doc 303-1 Filed 08/28/20 Entered 08/28/20 11:03:45 Desc <br /> Exhibit 1 A-1 and A-2 Page 27 of 38 <br /> WINTRUST COMMERCIAL FINANCE <br /> RIDER NO. 1 TO EQUIPMENT SCHEDULE SERIES 001 NO. 01 <br /> t8 <br /> To and part of Equipment Schedule Series 001 No. 01 dated as of the 4L day of May, 2018 (the"Schedule"), executed <br /> pursuant to that certain Master Lease Agreement dated as of the _�7 day of May, 2018 (the "Lease"), each between <br /> WINTRUST COMMERCIAL FINANCE, a division of Wintrust Asset Finance Inc., its successors and assigns ("Lessor"), <br /> and Rhino Energy LLC, its successors and permitted assigns ("Lessee"). <br /> RETURN PROVISIONS: In addition to the provisions of Section 13 of the Lease (provided that any inconsistency <br /> between the provisions of Section 13 and this Rider shall be resolved in favor of the provisions of this Rider), and provided <br /> that Lessee has not elected to exercise its option to purchase the Equipment, Lessee shall, at its expense: <br /> a. At least One. hundred eighty (180) days prior to expiration or earlier termination of the Lease, upon receiving <br /> reasonable notice from Lessor, provide or cause the vendor(s) or manufacturer(s) to provide to Lessor the following <br /> documents: (1) one set of service manuals, blue prints, process flow diagrams and operating manuals including <br /> replacements and/or additions thereto, such that all documentation is completely up-to-date; and (2) one set of <br /> documents, detailing equipment configuration, operating requirements, maintenance records, and other technical data <br /> concerning the set-up and operation of the Equipment, including replacements and/or additions thereto, such that all <br /> documentation is completely up-to-date. <br /> b. At least One hundred eighty (180) days prior to expiration or earlier termination of the Lease, upon receiving <br /> reasonable notice from Lessor, make the Equipment available for on-site operational inspections by potential purchasers, <br /> above ground and under power, and provide personnel, power and other operational requirements necessary to <br /> demonstrate electrical, mechanical systems for each item of the Equipment. <br /> c. Not more than One hundred eighty (180) days prior to expiration or earlier termination of the Lease, cause the <br /> Designated Person to perform a comprehensive physical inspection, including testing all material and workmanship of the <br /> Equipment; and if during such inspection, examination and test, the Designated Person finds any of the material or <br /> workmanship to be defective or the Equipment not operating within the manufacturer's specifications, then Lessee shall <br /> repair or replace such defective material and, after corrective measures are completed, Lessee will provide for a follow-up <br /> inspection of the Equipment by the Designated Person as outlined in the preceding clause. <br /> d. Upon return, Lessee shall cause the Designated Person to provide to Lessor an inspection report prepared <br /> immediately prior to redelivery of the Equipment, confirming that the Equipment is in the condition required by the Lease <br /> and this Rider or specifying any deficiencies in such compliance, including the estimated cost of repairs required to cause <br /> such compliance. Such report shall: (1) include a detailed inventory of all components of the Equipment (including, but <br /> not limited to, a listing of model and serial numbers for all components); (2) with reference to computer and computer- <br /> based equipment comprising the Equipment, include a detailed listing of all internal circuit boards by both the model and <br /> serial number for all hardware comprising the Equipment and a listing of all software features, listed individually; and (3) <br /> detail any attachments, alterations or additions made after initial delivery and acceptance of the Equipment pursuant to <br /> the Lease, and include photographs of the Equipment and, if requested by Lessor, a videotape of the Equipment in an <br /> operational state. <br /> e. At least One hundred eighty (180) days prior to expiration or earlier termination of the Lease, provide for an <br /> inspection and Fair Market Value appraisal to be performed by an appraiser of Lessor's choice, with the results of such <br /> appraisal to be forwarded to Lessor. <br /> f. Ensure that all inspections, overhauls, rebuilds, or certifications known to be or expected to be due within One (1) <br /> month(s) is/are completed prior to redelivery. <br /> g. Cause the Equipment to be steam cleaned and degreased. <br /> h. Provide for the deinstallation and packing of the Equipment to include, but not be limited to, the following: (1) all <br /> process fluids shall be removed from the Equipment and disposed of in accordance with the then current waste disposal <br /> laws and regulations. At no time are materials which could be considered hazardous waste by any regulatory authority to <br /> be shipped with machinery; (2) all internal fluids such as lube oil and hydraulic fluid are to be filled to operating levels; <br /> filler caps are to be secured and disconnected hoses are to be sealed to avoid spillage; (3) the manufacturer's <br /> representative shall deinstall all Equipment in accordance with the specifications of the manufacturer; and (4) the <br /> Equipment shall be packed properly and in accordance with the manufacturer's recommendations. <br /> i. Lessee shall provide to Lessor at least 180 day written notice of return prior to lease expiration. <br /> AJM 3087924 v.1 5/19/2016 9:43 AM <br />