Laserfiche WebLink
Method/Analysis Information <br /> Product: Calculation <br /> Analytical Batch: 1376247 Method: TDS Calculation and TDS Calculation Ratio <br /> Sample Analysis <br /> The following samples were analyzed using the analytical protocol as established in Calculation: <br /> Sample ID Client ID <br /> 344616001 Sunday MW 1 <br /> 344616002 Sunday MW I <br /> 344616003 Sunday MW 2 <br /> 344616004 Sunday MW 3 <br /> SOP Reference <br /> Procedure for preparation,analysis and reporting of analytical data are controlled by GEL Laboratories LLC as <br /> Standard Operating Procedure(SOP).The data discussed in this narrative has been analyzed in accordance with <br /> GL-GC-E-107 REV#9. <br /> Preparation/Analytical Method Verification <br /> The SOP stated above has been prepared based on technical research and testing conducted by GEL Laboratories, <br /> LLC.and with guidance from the regulatory documents listed in this"Method/Analysis Information" section. <br /> Calibration Information <br /> The TDS Cale is calculated from Carbonate alkalinity(CaCO3),Total Dissolved Solids,Hydroxide alkalinity as <br /> CaCO3,TDS Cale,Bicarbonate alkalinity (CaCO3),Fluoride,Chloride, Sulfate,Nitrogen,Nitrate/Nitrite,Calcium, <br /> Magnesium,Potassium and Sodium results. <br /> Quality Control(00 Information <br /> Technical Information <br /> GEL assigns holding times based on the date and time of sample collection.Those holding times expressed in hours <br /> are calculated in the A1phaLims system by hours.Those holding times expressed as days expire at midnight on the day <br /> of expiration. <br /> Sample Dilutions <br /> The samples in this SDG did not require dilutions. <br /> Page 55 of 94 <br />