Laserfiche WebLink
Method/Analysis Information <br /> Product: Total Phosphorus <br /> Analytical Batch: 1373244 Method: EPA 365.4 Phosphorus and Total in <br /> Prep Batch : 1373241 Method: EEPA 365.4 Prep <br /> Sample Analysis <br /> The following samples were analyzed using the analytical protocol as established in EPA 365.4: <br /> Sample ID Client ID <br /> 344616001 Sunday MW 1 <br /> 344616002 Sunday MW 1D <br /> 344616003 Sunday MW 2 <br /> 344616004 Sunday MW 3 <br /> 1203051760 Method Blank(MB) <br /> 1203051761 Laboratory Control Sample(LCS) <br /> 1203051762 344588007(CAAN-14-54790)Sample Duplicate(DUP) <br /> 1203051763 344588007(CAAN-14-54790)Matrix Spike(MS) <br /> The samples in this SDG were analyzed on an"as received"basis. <br /> SOP Reference <br /> Procedure for preparation,analysis and reporting of analytical data are controlled by GEL Laboratories LLC as <br /> Standard Operating Procedure(SOP).The data discussed in this narrative has been analyzed in accordance with <br /> GL-GC-E-103 REV# 10. <br /> Preparation/Analytical Method Verification <br /> The SOP stated above has been prepared based on technical research and testing conducted by GEL Laboratories, <br /> LLC.and with guidance from the regulatory documents listed in this"Method/Analysis Information" section. <br /> Calibration Information <br /> The Nutrient analysis was performed on a Lachat QuickChem FIA+8000 Series. <br /> Continuing Calibration Blanks <br /> All continuing calibration blanks(CCBs)associated with reported data from this batch were within acceptance limits. <br /> Calibration Verification Information(CCV) <br /> All continuing calibration verification standards(CCVs)associated with reported data from this batch were within <br /> acceptance limits. <br /> Page 48 of 94 <br />