Laserfiche WebLink
Method/Analysis Information <br /> Product: Total Phosphorus <br /> Analytical Batch: 1334328 Method: EPA 365.4 Phosphorus and Total in <br /> Prep Batch : 1334327 Method: EEPA 365.4 Prep <br /> Sample Analysis <br /> The following samples were analyzed using the analytical protocol as established in EPA 365.4: <br /> Sample ID Client ID <br /> 334116001 SMW1 Pre <br /> 334116002 SMW1 Final <br /> 334116003 SMW 11 <br /> 334116004 SMW3 Pre <br /> 1202955748 Method Blank(MB) <br /> 1202955749 Laboratory Control Sample(LCS) <br /> 1202955752 333909003(CAWA-13-41331)Sample Duplicate(DUP) <br /> 1202955753 333909003(CAWA-13-41331)Matrix Spike(MS) <br /> The samples in this SDG were analyzed on an"as received"basis. <br /> SOP Reference <br /> Procedure for preparation,analysis and reporting of analytical data are controlled by GEL Laboratories LLC as <br /> Standard Operating Procedure(SOP).The data discussed in this narrative has been analyzed in accordance with <br /> GL-GC-E-103 REV# 10. <br /> Preparation/Analytical Method Verification <br /> The SOP stated above has been prepared based on technical research and testing conducted by GEL Laboratories, <br /> LLC.and with guidance from the regulatory documents listed in this"Method/Analysis Information" section. <br /> Calibration Information <br /> The Nutrient analysis was performed on a Lachat QuickChem FIA+8000 Series. <br /> Continuing Calibration Blanks <br /> All continuing calibration blanks(CCBs)associated with reported data from this batch were within acceptance limits. <br /> Calibration Verification Information(CCV) <br /> All continuing calibration verification standards(CCVs)associated with reported data from this batch were within <br /> acceptance limits. <br /> Page 50 of 99 <br />