Laserfiche WebLink
The following statement has been added to Section 3.4,5"'paragraph:`The installation of such <br /> system(s)in any of the current or future groundwater monitoring wells shall require submittal <br /> and Division approval of a technical revision (TR)to the mine permit." <br /> 11. Section 3.6.1,please provide a table of listing the method specific holding times. <br /> Table 2 providing water sample holding times by method for the current analytical suite,has been <br /> provided,referenced appropriately in Section 3.6.1. <br /> 12. Section 3.6.2,Sample Labels,it is unclear to the Division if each sample will be labeled with bulleted <br /> information or labels might contain some of the bulleted information.Please commit to each sample <br /> label will be completed with the bulleted information. <br /> The following statement has been added to Section 3.6.2 Sample Labeling clarifying information to <br /> be placed on each sample bottle label: "Individual sample bottles are labeled by the lab for each <br /> respective analytical test or group of tests and grouped into individual clear plastic bags. All sample <br /> containers shall be labeled using waterproof ink directly on the bottle or bottle label if such a label is <br /> present. Immediately following collection,sample bottles for each sample location ID shall be placed <br /> in their respective plastic bags provided by the lab containing each bottle set for protection and <br /> grouping and sealed by either twist-tie or Ziploc mechanism.Information provided on each bottle set <br /> bag and the individual sample bottles and/or labels shall include: <br /> • Site or project name; <br /> • Sample location ID; <br /> • Sample collection date and time; <br /> • Sampler's name or initials" <br /> 13. Section 3.6.2, Chain of Custody Forms,please provide additional detail on the information that will be <br /> contained on each chain of custody form including but not limited to:project identification, date and <br /> time of sampling, sample matrix type,sample preservation method(s),signature of sampling <br /> personnel, and date and time of sample custody transfer. <br /> The following statement has been added to Section 3.6.2 Chain of Custody Forms:'The chain of <br /> custody form requires the following information to be accurately written in ink: <br /> • Contact information for report receipt(GCC Rio Grande) <br /> • Contact information for report copy receipt(consultant or other relevant party) <br /> • Contact information for laboratory invoice receipt(GCC Rio Grande) <br /> • Samplers printed name,signature,site information (state,zip code,time zone) <br /> • Designation of analytical suite designation,typically assigned as quote number <br /> • Chronological listing of sample ID,date/time of collection,matrix(groundwater), number <br /> of containers,analysis requested (analytical suite—"GW-Compliance") <br /> • Remarks as necessary <br /> • Relinquished by signature and date/time <br /> No scratch-outs are permitted on the chain of custody form. If a minor correction is required,such <br /> correction shall be made in ink by a single line through the error and corrected information beside <br /> it. Initials shall be placed beside the correction. If the error is deemed significant by the sampler <br />