Laserfiche WebLink
technique for generating CIRCULAR surfaces has been <br /> specified. <br /> 400 trial surfaces will be generated and analyzed. <br /> 20 Surfaces initiate from each of 20 points equally <br /> spaced <br /> along the ground surface between x = 80 .0 ft <br /> and x = 105.0 ft <br /> Each surface terminates between x = 208.0 ft <br /> and x = 224.0 ft <br /> Unless further limitations were imposed, the minimum <br /> elevation <br /> at which a surface extends is y = 4780.0 ft <br /> 7.0 ft line segments define each trial failure <br /> surface. <br /> --------------------- <br /> ANGULAR RESTRICTIONS <br /> --------------------- <br /> The first segment of each failure surface will be <br /> inclined <br /> within the angular range defined by <br /> Lower angular limit -45.0 degrees <br /> Upper angular limit -5.0 degrees <br /> Factors of safety have been calculated by the <br /> * * * * * SIMPLIFIED BISHOP METHOD * * * <br /> The most critical circular failure surface <br /> is specified by 23 coordinate points <br /> Point x-surf y-surf <br /> 4 <br />