Laserfiche WebLink
EXHIBIT A-Legal Description and Location Map <br /> Rule 6.3.1 (Starts on Page 134 of the Rules) <br /> 1) Please provide the legal location description of the Mine: <br /> a. COUNTY: Teller <br /> b. PRINCIPAL MERIDIAN (check one): _.�L 6th (Colorado) F-1 New Mexico Principal <br /> Meridian(NMPM) <br /> c. SECTION(write number): 24 <br /> d. TOWNSHIP(write number and check direction): T 11 North South <br /> e. RANGE(write number and check direction): R 71 East West <br /> E QUARTER SECTION(check one): ❑NE ❑ NW F-1 SE M SW <br /> g. QUARTER/QUARTER SECTION(check one): ❑NE LL NW ❑SE ❑ S W <br /> h. Approximate elevation (write number): 9200 Feet <br /> i. Direction and miles to nearest town/city Florissant is approximately 9-10 miles South of claim <br /> Additional Legal Description: <br /> Note: Description shall be by township, range, and section, to at least the nearest quarter quarter section. A <br /> metes and bounds survey description is also acceptable. Where available, the street address or lot number(s) <br /> shall be given. <br /> 2) Primary Mine Entrance Location (report in either Latitude/Longitude OR UTM): <br /> Latitude/Longitude: <br /> Degrees Minutes Seconds(DMS): <br /> Latitude(N): deg 39 min 04 sec 18 10 (2 decimal places) <br /> Longitude (W): deg 105 min 17 see 28 .60 (2 decimal places) <br /> OR <br /> Decimal Degrees(DD): <br /> Latitude(N): (5 decimal places) <br /> Longitude(W): - (5 decimal places) <br /> OR <br /> Universal Tranverse Mercator(UTM): <br /> UTM Datum (specify NAD27,NAD83 or WGS 84) Zone <br /> Easting: <br /> Northing: <br /> 3) Please provide a Location Map or use the attached template. The map must show the location of <br /> the mine site on a USGS 7.5 minute Quad (1:24,000 scale)or equivalent map. An example location <br /> map is enclosed. <br />