Laserfiche WebLink
Cmc CONTINENTAL MATERIALS CORPORATION <br /> 22. Drill and Blast Material:The response requires additional clarification. The response reduced the <br /> original 247,000 yd3 to 246,299 yd3 by not rounding up. Does that mean the 610,000 yd3 in the 6th <br /> bullet needs to be reduced to 609,299 yd3 or are we 701 yd3 short? <br /> Response: The volumes in the text of Exhibit L were rounded up to the nearest 1,000 cubic yards. The <br /> volumes in the calculations and the text have been revised so they are consistent throughout the permit <br /> document. <br /> Additional Comments <br /> 30. Application, Item 11, p. 3: Conversations during the December 5, 2019 site visit confirmed with the <br /> DRMS the most appropriate mailing address for you is"549 E Cucharras Street Colorado Springs CO <br /> 80903". Please resubmit page 3 of the application correcting the correspondence information. <br /> Response: Page 3 of the application has been resubmitted with the new mailing address. <br /> 31. Stormwater Control: Exhibits C-2, F-1 and G-1 show a natural by default channel/downchute by <br /> virtue of the reclaimed contours between elevations 7400 and 7700, specifically between cross-sections <br /> X-X'and Y-Y'(reference Exhibit C-2).This downchute does not have flow arrows, implying there is no <br /> proposed design for this feature. Please provide design concepts for this downchute and energy <br /> dissipation methods/features to divert flows into the terrace channel(s) at elevation 7400. <br /> Response: The reclamation topography has been revised to remove this downchute.The text and <br /> figures in Exhibits C, D, E, F, G, and L have been updated to include the 115,000 cubic yards required to <br /> fill this area. <br /> 32. Exhibit R: The notice of filing the responses to our PAR with the El Paso County Clerk was blank. <br /> Please provide a signed copy. <br /> Response: The signed copy of Exhibit R was provided via email on December 16, 2019. <br /> Pikeview Quarry Amendment 4, Response to Adequacy <br /> January 7, 2020 <br />