2019-12-13_REVISION - M1980244 ‎(58)‎

• Permit No: M1980244
• IBM Index Class Name: Revision
• Doc Date: 12/13/2019
• Doc Name Note: Appendix 1
• Doc Name: Request For Amendment To Permit
• From: CC&V
• To: DRMS
• Type & Sequence: AM13
• Email Name: TC1
• Email Name: MAC
• Email Name: BFB
• Email Name: ERR
• Email Name: JPL
• Media Type: D
• Archive: No

A GEORGIA LIMITED LIABILITY COMPANY
6 May 2019
Eric L Niebler,
NewFields
9400 Station Street, Suite 300
Lone Tree, CO 80124
Subject: Laboratory Test Results Transmittal
Interface Direct Shear Testing
Cripple Creek Project
Dear Mr. Niebler,
SGI Testing Services, LLC (SGI) is pleased to present the attached test results
for the above-mentioned testing program. The note section below addresses sample
preparation, sample disposal and a disclosure statement.
SGI appreciates the opportunity to provide laboratory testing services to
NewFields. Should you have any questions regarding the attached document(s), or if
you require additional information, please do not hesitate to contact the undersigned.
Sincerely,
Zehong Yuan, Ph.D., P.E.
Laboratory Manager
Attachments
NOTES
(1)Unless otherwise noted in the test results the sample(s)/specimen(s)were prepared in accordance with the applicable test standards or generally accepted sampling
procedures.
(2)Contaminated/chemical samples and all related laboratory generated waste(i.e.,test liquids,PPE,absorbents,etc.)will be returned to the client or designated
representative(s),at the client's cost,within 60 days following the completion of the testing program,unless special arrangements for proper disposal are made with SGI.
(3)Materials that are not contaminated will be discarded after test specimens and archived specimens are obtained.Archived specimens will be discarded 30 days after the
completion of the testing program,unless long-term storage arrangements are specifically made with SGI.
(4)The reported results apply only to the materials and test conditions used in the laboratory testing program.The results do not necessarily apply to other materials or test
conditions.The test results should not be used in engineering analysis unless the test conditions model the anticipated field conditions.The testing was performed in accordance
with general engineering testing standards and requirements.The reported results are submitted for the exclusive use of the client to whom they are addressed.
SGI 19024.REPORT.2091.02
MAIL TO: SGI TESTING SERVICES, LLC FACILITY LOCATION
P.O.Box 2427 4405 INTERNATIONAL BLVD.,SUITE B-1 17
LILBURN,GA 30048-2427 NORCROss,GA 30093
WEB SITE:wwwSGILAB.com PHONE:[phone] FAx:[phone]