Laserfiche WebLink
EXHIBIT A-Legal Description and Location Map <br /> Rule 6.3.1 (Starts on Page 134 of the Rules) <br /> 1) Please provide the le al location description of the Mine: <br /> a. COUNTY: � l ' S(' <br /> b. PRINCIPAL MERIDIAN (check one): 6th (Colorado) F-1 New Mexico Principal <br /> Meridian(NMPM) <br /> c. SECTION (write number): Q <br /> d. TOWNSHIP(write number and check direction): T North _�South <br /> e. RANGE (write number and check direction): R East _Fq- West <br /> L QUARTER SECTION (check one): FIN E L---j NW F-1 SE F] SW <br /> g. QUARTER/QUARTER SECTION (check one): NE NW SE F SW <br /> h. Approximate elevation(write number): Feet <br /> i. Direction and miles to nearest town/city <br /> Additional Legal Description: <br /> Note: Description shall be by township, range, and section, to at least the nearest quarter quarter section. A <br /> metes and bounds survey description is also acceptable. Where available, the street address or lot number(s) <br /> shall be given. <br /> 2) Primary Mine Entrance Location (report in either Latitude/Longitude OR UTM): <br /> Latitude/Lon ig tude: <br /> Degrees Minutes Seconds(DMS): <br /> Latitude(N): deg min sec (2 decimal places) <br /> Longitude(W): deg min sec (2 decimal places) <br /> OR <br /> Decimal Degrees (DD): <br /> Latitude (l): (5 decimal places) <br /> Longitude (W): - /T. (5 decimal places) <br /> OR <br /> Universal Tranverse Mercator(UTM): <br /> UTM Datum(specify NAD27,NAD83 or WGS 84) Zone <br /> Easting: <br /> Northing: <br /> 3) Please provide a Location Map or use the attached template. The map must show the location of <br /> the mine site on a USGS 7.5 minute Quad (1:24,000 scale)or equivalent map. An example location <br /> map is enclosed. <br />