Laserfiche WebLink
Table 6. USLE Variables and Basis for Selection. <br /> Pre-mining <br /> Variable Trapper's Trapper's Source Division's Comment <br /> Selection pp <br /> R 30 SCS Map: R factors for Colorado Reasonable, as per Trapper's location on R factor <br /> map. <br /> K 0.25 Trapper Permit C1981010 Reasonable, as per soil types of bond release <br /> Appendix Q Section XIII,Table E3 blocks delineated on map M29. <br /> LS 6.83 SCS LS Table, 675 ft, 15%Sloe Reasonable based on the 15%slope and 675 ft. <br /> p slope length <br /> C 0.05 NRCS C factor table for specified Reasonable as per pre-mining rangeland <br /> conditions conditions and applicable C value table. <br /> NRCS P factor table for specified Reasonable as per erosion control practice <br /> P 1 conditions factor,consistent with pre-mining practice on <br /> bond release blocks. <br /> Post-mining <br /> Variable Trapper's Trapper's Source Division's Comment <br /> Selection pp <br /> R 30 SCS Map: R factors for Colorado Reasonable, as per Trapper's location on R factor <br /> map. <br /> K 0.25 Trapper Permit C1981010 Reasonable,as per soil types on bond release <br /> Appendix Q Section XIII,Table E3 blocks delineated on map M29. <br /> LS 6.83 SCS LS Table, 675 ft, 15%Sloe Reasonable based on the 15%slope and 675 ft. <br /> p slope length <br /> NRCS C factor table for permanent <br /> pasture, rangeland, idle land and <br /> C 0.014 grazed woodland - no canopy, Reasonable as per vegetation data submitted <br /> 74.1 herbaceous cover,grass type with SL19 application (Table 1.2-1). <br /> (Table 1.2-1 of bond release <br /> application. <br /> P 1 NRCS P factor table for specified Reasonable, as no control practices were <br /> conditions employed. <br /> SEDCAD Comparison: Trapper utilized baseline data for selecting SEDCAD 4 parameters for <br /> modeling pre-mining conditions. Trapper utilized recent vegetative data in the bond release submittal <br /> for modeling post-mining conditions. The parameters employed in the SEDCAD model and their <br /> definitions are presented in the table below: <br /> Permit Number C 1981010 <br /> SL19 <br />