Laserfiche WebLink
IPAC 6832 <br /> Section 8. Exposure controls/personal protection <br /> Control parameters <br /> Occupational exposure limits <br /> None. <br /> Appropriate engineering Good general ventilation should be sufficient to control worker exposure to airborne <br /> controls contaminants. <br /> Environmental exposure Emissions from ventilation or work process equipment should be checked to ensure <br /> controls they comply with the requirements of environmental protection legislation. In some <br /> cases, fume scrubbers, filters or engineering modifications to the process <br /> equipment will be necessary to reduce emissions to acceptable levels. <br /> Individual protection measures <br /> Hygiene measures Wash hands, forearms and face thoroughly after handling chemical products, before <br /> eating, smoking and using the lavatory and at the end of the working period. <br /> Appropriate techniques should be used to remove potentially contaminated clothing. <br /> Wash contaminated clothing before reusing. Ensure that eyewash stations and <br /> safety showers are close to the workstation location. <br /> Eye/face protection Safety eyewear complying with an approved standard should be used when a risk <br /> assessment indicates this is necessary to avoid exposure to liquid splashes, mists, <br /> gases or dusts. If contact is possible, the following protection should be worn, <br /> unless the assessment indicates a higher degree of protection: safety glasses with <br /> side-shields. <br /> Hand protection Chemical-resistant, impervious gloves complying with an approved standard should <br /> be worn at all times when handling chemical products if a risk assessment indicates <br /> this is necessary. <br /> Body protection Personal protective equipment for the body should be selected based on the task <br /> being performed and the risks involved and should be approved by a specialist <br /> before handling this product. <br /> Other skin protection Appropriate footwear and any additional skin protection measures should be <br /> selected based on the task being performed and the risks involved and should be <br /> approved by a specialist before handling this product. <br /> Respiratory protection Based on the hazard and potential for exposure, select a respirator that meets the <br /> appropriate standard or certification. Respirators must be used according to a <br /> respiratory protection program to ensure proper fitting, training, and other important <br /> aspects of use. <br /> Section 9. Physical and chemical properties <br /> Physical state Liquid. [Clear.] <br /> Color Amber. <br /> Odor Faint. <br /> Odor threshold Not available. <br /> pH 8 to 10 <br /> Melting point <-20°C (<-4°F) <br /> Boiling point 100°C (212°F) <br /> Flash point Not available. <br /> Evaporation rate Not available. <br /> Flammability (solid, gas) Not available. <br /> Lower and upper explosive Not available. <br /> (flammable) limits <br /> Date of issue/Date of revision :6 September 2017 418 <br />