Laserfiche WebLink
Stephanie Fancher-English <br /> From: Don Friess <dfriess@d2cad.com> <br /> Sent: Monday,July 15, 2019 9:44 AM <br /> To: Stephanie Fancher-English <br /> Subject: Re: Pond Survey <br /> Sorry for the delay. I've been tied up with a death in the family. <br /> Without a scale bar on the drawing there is no way to be absolutely certain that the image is to scale in the pdf. <br /> Assuming that the pdf was created to scale, I find 3:1 slopes in the steepest areas. Good to go` <br /> On 7/10/2019 10:12 AM, Stephanie Fancher-English wrote: �COn�j�rrvteA (Yavut(� is -Jb SCOl e), <br /> Hi Don, <br /> Attached is a Pond survey that we just had done for the Green/Croissant Pit. <br /> The State Division of Reclamation Mining and Safety has asked me to verify that the side slopes are 3 <br /> foot horizontal to every 1 foot vertical. We are supposed to be at a 3:1 minimum, and I want to make <br /> ,sure what I have before I send this in to the State. <br /> Our surveyor seems to be overwhelmed at the moment, is there an easy way for you to calculate the <br /> -slope off of this drawing? <br /> I can print this off and scale it if it's too much of a hassle, but not sure what size is needed for the scale <br /> they have called out. 24 x 36??? <br /> Thanks, <br /> Stephanie Fancher-English <br /> Loveland Ready-Mix Concrete, Inc. <br /> Office: 970.667.2680 <br /> Cell: 970.663.9162 <br /> r_ <br /> LOVELAND <br /> READY-MIX <br /> CONCRETE <br />