2019-06-27_REVISION - M2018051 (25)

Home Browse Search

BLACK MOUNTAIN 500 Main St. Suite 1200, Fort Worth,TX 76102 (817) 698-9901 June 26, 2019 ORIGINAL Peter Hays RECE'V Environmental Protection Specialist ED Colorado Division of Reclamation, Mining and Safety SUN 2 Department of Natural Resources 20j9 1313 Sherman Street, Room 215 Denver, CO 80203 1dUrlZMDWEN RE: Black Mountain Sand Weld LLC Lost Creek Mine M-2018-051, Response to AM-01 Incompleteness Letter Mr. Hays, In response to the AM-01 Incompleteness Letter, dated June 24, 2019, please find included revised documentation to satisfy items 1-3. Per a follow-up call between your office and Black Mountain's consulting personnel, the permit boundary acreage was changed to indicate 2,215.59 acres,to clarify lands which Black Mountain legally has access to and to fully satisfy the requirements of Rule 1.1(3). However,the affected lands acreage of-1,796 was not changed. A mapping oversight did not include the entire access road in the affected lands boundary on the maps and exhibits only; it was already included in the affected lands calculated acreage. Included in this enclosure package are the following items: • Revised Page 1 of the Application Form, indicating the permit boundary acreage of 2,215.59 acres to clarify lands owned by Black Mountain and satisfy Rule 1.1(3) • Revised Page 3 of Exhibit A with modified language to clarify that the permit boundary acreage is 2,215.59 acres and the affected lands acreage is 1,796 acres • Revised Maps for Exhibit B and C, with a modified affected lands boundary to include the entire access road from County Road 91 to the site and modified language on Exhibit C1 to clarify the affected lands acreage • Revised Page 1 of Exhibit D to clarify that the permit boundary acreage is 2,215.59 acres and the affected lands acreage is 1,796 acres • Revised Figures D3 and D4 of Exhibit D (pages 8-9)to include the entire access road from County Road 91 to the site • Revised Exhibit D1 of Exhibit D to include the entire access road from County Road 91 to the site • Revised Page 1 of Exhibit E to clarify that the permit boundary acreage is 2,215.59 acres and the affected lands acreage is 1,796 acres • Revised Figure E1 of Exhibit E (page 6) to include the entire access road from County Road 91 to the site • Revised Exhibit F to include the entire access road from County Road 91 to the site. All of the revised pages have been marked to indicate a revision, either in the header of the page or in the Rev. description of the maps and exhibits. A copy of these revised pages, minus any confidential Exhibits, were provided to the Weld County Clerk & Recorder's Office on June 26, 2019. A copy of the proof of delivery receipt is attached.