Laserfiche WebLink
__________________________________________________________________________________________________________________________________________________________________________________________Engineering measures General or dilution ventilation is frequently insufficient as the sole means ofcontrolling employee exposure. Local ventilation is usually preferred. Explosion-proofequipment (for example fans, switches, and grounded ducts) should be used inmechanical ventilation systems.Personal protective equipment <br />General advice Avoid contact with skin and eyes. Do not breathe vapors or spray mist. Use only in <br />an area equipped with a safety shower. Hold eye wash fountain available. <br />Hygiene measures Avoid contact with the skin and the eyes. Avoid exposure to vapor. When using, do <br />not eat, drink or smoke. Remove and wash contaminated clothing and gloves, <br />including the inside, before re-use. Wash hands before breaks and immediately after <br />handling the product. Clean skin thoroughly after work; apply skin cream . <br />Respiratory protection If aerosols or vapors are present, respiratory protection is required (gas filter A) . Full <br />mask with above mentioned filter according to producers using requirements or self- <br />contained breathing apparatus. Equipment should conform to EN 136 or EN 140 and <br />EN 143. <br />Eye protection safety glasses with side-shields. Equipment should conform to EN 166. <br />Skin protection impervious clothing <br />Hand protection Chemicals resistant gloves <br />Suitable material Butyl-rubber <br />Type Butoject (Company KCL) or comparable article; <br />or refer to glove manufacturer's recommendation <br />Evaluation according to EN 374: level 6 <br />Material thickness approx. 0.3 mm <br />Break through time 480 min <br />Suitable material butyl-rubber <br />Type Butoject (Company KCL) or comparable article; <br />or refer to glove manufacturer's recommendation <br />Evaluation according to EN 374: level 6 <br />Material thickness approx. 0.7 mm <br />Break through time 480 min <br />Environmental exposure controls <br />Do not discharge into the drains/surface waters/groundwater <br />Environmental Precautions <br />Should not be released into the environment <br />9. Physical and chemical properties <br />Appearance <br />Form liquid <br />Color colourless <br />Odor mild <br /> 5 of 10 <br />Methyl isobutyl carbinol Issuing date Mar.02.2012AGHS/ENSAFETY DATA SHEETMSDS number 80063 Revision Date Aug.15.2011Product nameRevision Number 3.02