2019-05-06_PERMIT FILE - M2019022

Home Browse Search

PART I Permit No.: COR400000 (e) outdoor storage activities (erodible building materials, fertilizers, chemicals, etc.); (f) vehicle and equipment maintenance and fueling; (g) significant dust or particulate generating processes (e.g., saw cutting material, including dust); (h) routine maintenance activities involving fertilizers, pesticides, herbicides, detergents, fuels, solvents, oils, etc.; (i) on-site waste management practices (waste piles, liquid wastes, dumpsters); (j) concrete truck/equipment washing, including washing of the concrete truck chute and associated fixtures and equipment; (k) dedicated asphalt, concrete batch plants and masonry mixing stations; (l) non-industrial waste sources such as worker trash and portable toilets. v. Implementation of Control Measures. The SWMP must include design specifications that contain information on the implementation of the control measure in accordance with good engineering hydrologic and pollution control practices; including as applicable drawings, dimensions, installation information, materials, implementation processes, control measure-specific inspection expectations, and maintenance requirements. The SWMP must include a documented use agreement between the permittee and the owner or operator of any control measures located outside of the permitted area, that are utilized by the permittee's construction site for compliance with this permit, but not under the direct control of the permittee. The permittee is responsible for ensuring that all control measures located outside of their permitted area, that are being utilized by the permittee's construction site, are properly maintained and in compliance with all terms and conditions of the permit. The SWMP must include all information required of and relevant to any such control measures located outside the permitted area, including location, installation specifications, design specifications and maintenance requirements. vi. Site Description. The SWMP must include a site description which includes, at a minimum, the following: (a) the nature of the construction activity at the site; (b) the proposed schedule for the sequence for major construction activities and the planned implementation of control measures for each phase. (e.g.: clearing, grading, utilities, vertical, etc.); (c) estimates of the total acreage of the site, and the acreage expected to be disturbed by clearing, excavation, grading, or any other construction activities; (d) a summary of any existing data used in the development of the construction site plans or SWMP that describe the soil or existing potential for soil erosion; Page 12 of 33