2019-04-25_REVISION - M2008080 ‎(7)‎

• Permit No: M2008080
• IBM Index Class Name: Revision
• Doc Date: 4/25/2019
• Doc Name: Adequacy Review Response
• From: J & T Consulting
• To: DRMS
• Type & Sequence: TR4
• Email Name: PSH
• Media Type: D
• Archive: No

Plugging Procedure for Intent and Subsequent Report
CIBP#1: Depth 6502 with 2 sacks cmt on top. CIPB#2: Depth 120 with 40 sacks cmt on top.
CIBP#3: Depth with sacks cmt on top. CIPB#4: Depth with sacks cmt on top.
CIBP#5: Depth with sacks cmt on top. NOTE:Two(2)sacks cement
required on all CIBPs.
Set 60 sks cmt from 3178 ft.to 2650 ft. Plug Type: CASING Plug Tagged:
Set 60 sks cmt from 1600 ft.to 1072 ft. Plug Type: CASING Plug Tagged:
Set sks cmt from ft.to ft. Plug Type: Plug Tagged:
Set sks cmt from ft.to ft. Plug Type: Plug Tagged:
Set sks cmt from ft.to ft. Plug Type: Plug Tagged:
Perforate and squeeze at ft.with sacks. Leave at least 100 ft. in casing CICR Depth
Perforate and squeeze at ft.with sacks. Leave at least 100 ft. in casing CICR Depth
Perforate and squeeze at ft.with sacks. Leave at least 100 ft. in casing CICR Depth
(Cast Iron Cement Retainer Depth)
Set 270 sacks half in. half out surface casing from 632 ft.to 130 ft. Plug Tagged:
Set 40 sacks at surface
Cut four feet below ground level,weld on plate Above Ground Dry-Hole Marker: _ Yes ? No
Set sacks in rat hole Set sacks in mouse hole
Additional Plugging Information for Subsequent Report Only
Casing Recovered: 532 ft. 5+1/2 inch casing Plugging Date: 10/29/2018
of
*Wireline Contractor: C&J Energy Services *Cementing Contractor: C&J Energy Services
Type of Cement and Additives Used: Class G 15.8 PPG Cement&Type III 14.8 PPG Portland Cement
Flowline/Pipeline has been abandoned per Rule 1105 ? Yes L... No *ATTACH JOB SUMMARY
Technical Detail/Comments:
Motis 1 (05-123-11891)/Plugging Procedure
Producing Formation: Codell:6842'-6856'Niobrara: 6552'-6764'
Upper Pierre Aquifer: 318'-1335'
TD: 7005' PBTD:6908.6'
Surface Casing: 8 5/8"24#@332'w/270 sxs cmt
Production Casing:5 1/2" 17.0#@ 7005'w/375 sxs cmt(TOC @ 5283'—CBL).
DV Tool @ 2928'w/700 sxs cmt(TOC @ 1100'—CBL).
Procedure:
1. MIRU pulling unit. Pull 2 3/8"tubing.
2. RU wireline company.
3.TIH with CIBP. Set BP at 6502'. Top with 2 sxs 15.8#/gal Cl G cement.
4.TIH with tubing to 3178'. RU cementing company. Mix and pump 60 sxs 15.8#/gal Cl G cement down tubing. (DV tool coverage
from 3178'-2678').TOC at 2650'.
5. Pickup tubing to 1600'. Mix and pump 60 sxs 15.8#/gal Cl G cement down tubing. (Pierre coverage from 1600'-1 100'). TOOH
with tubing.TOC at 1072'.
6.TIH with casing cutter.Cut 5%"casing at 532'. Pull cut casing.
7.TIH with tubing to 632'. Mix and pump 270 sxs 14.8#/gal Type III cement down tubing.TOC at 130'.
8.TIH with CIBP. Set BP at 120'. Top with 40 sxs 14.8#/gal Type III cement. Cement circulate to surface.
9. Cut surface casing 6' below ground level and weld on cap.
I hereby certify all statements made in this form are,to the best of my knowledge,true,correct,and complete.
Signed: Print Name: Valerie Danson
Title: Reg Tech Date: 11/27/2018 Email: [e-mail]
Date Run:411512019 Doc[#401851459]Well Name:MOTIS 1 Page 2 of 3