Laserfiche WebLink
2.05.4(2)(e) <br />(2)(g) Sealing or Managing Mine Openings, Exploration Holes, Other Boreholes or Wells <br />No mine portals will be developed so no sealing plan is required. Monitoring <br />wells will be sealed in accordance with the requirements of Rule 4.07. <br />(2)(g) Drill holes, not completed to aquifers will be sealed by replacing cuttings or <br />other suitable media in the hole and placing a suitable plug 10 feet below the <br />ground to support a cement plug or other media approved by the Division to <br />within 3 feet of the ground surface. <br />Drill holes completed in non artisan aquifers will be sealed using cement or <br />other suitable sealant by placing the sealant to extend 20 feet above and <br />below the water bearing zone. A surface plug will then be placed in <br />accordance with the above paragraph. The hole will be marked. <br />(2) (h) 'Other Permits' necessary to comply with applicable air and water quality <br />laws and regulations and health and safety standards are located in Exhibit <br />13. <br />Permit Application 2.05-40 04/11 <br />