Laserfiche WebLink
Process Solution Enhancement System (PSES) Filtrate <br /> Safety Data Sheet <br /> Aluminum(7429-90-5) <br /> NIOSH NIOSH REL(TWA)(mg/m') F51 <br /> 0 mg/m'(total dust) <br /> mg/m'(respirable dust) <br /> 8.2. Exposure controls <br /> Appropriate en ineerin controls Local exhaust and general ventilation must be adequate to meet exposure standards. <br /> engineering 9 4 P <br /> Hand protection Wear protective gloves to minimize skin exposure. <br /> Eye protection Wear protective safety glasses or chemical safety goggles. <br /> Skin and body protection Wear suitable working clothes. <br /> Respiratory protection If exposure limits are exceeded or irritation is experienced,NIOSH approved respiratory <br /> protection should be worn. <br /> -SECTIONand chemical properties <br /> 9.1. Information on basic physical and chemical properties <br /> Physical state Solid <br /> Appearance Rock fragments <br /> Odor Odorless <br /> Odor threshold No data available <br /> pH No data available <br /> Melting point No data available <br /> Freezing point No data available <br /> Boiling point No data available <br /> Flash point No data available <br /> Relative evaporation rate(butyl acetate=1) No data available <br /> Flammability(solid,gas) No data available <br /> Vapor pressure No data available <br /> Relative vapor density at 20°C No data available <br /> Relative density No data available <br /> Solubility Insoluble. <br /> Log Pow No data available <br /> Auto-ignition temperature No data available <br /> Decomposition temperature No data available <br /> Viscosity,kinematic No data available <br /> Viscosity,dynamic No data available <br /> Explosion limits No data available <br /> Explosive properties No data available <br /> Oxidizing properties No data available <br /> 92. n <br /> Other e information <br /> i o at o <br /> No additional information available <br /> SECTION1 <br /> 10.1. Reactivity <br /> No additional information available <br /> 10.2. Chemical stability <br /> Stable under normal product handling conditions. <br /> 10.3. Possibility of hazardous reactions <br /> Will not occur. <br /> 10.4. Conditions to avoid <br /> Dust generation,moisture,and high temperatures <br /> 10.5. Incompatible materials <br /> Not determined. <br /> 10/25/2018 EN(English US) 3/5 <br />