Laserfiche WebLink
CONTAINER HANDLING: <br />NONREFILLABLE METAL CONTAINER (EQUAL TO OR LESS THAN 5 GALLONS): Non-Refillable Container. Do not <br />reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the <br />remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the <br />container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store <br />rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. <br />Then offer for recycling, if available, or puncture and dispose of in a sanitary landfill, or by other procedures approved by <br />state and local authorities <br />NONREFILLABLE METAL CONTAINER (GREATER THAN 5 GALLONS): Non-Refillable Container. Do not reuse or <br />refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the <br />remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten <br />closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand <br />the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and <br />forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. <br />Repeat this procedure two more times. Then offer for recycling, if available or puncture and dispose of in a sanitary landfill, <br />or by other procedures approved by state and local authorities. <br />NONREFILLABLE PLASTIC CONTAINER (EQUAL TO OR LESS THAN 5 GALLONS): Non-Refillable Container: Do <br />not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty <br />the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill <br />the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or <br />store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more <br />times. Then offer for recycling, if available, or puncture and dispose of in a sanitary landfill, or incineration, or if allowed by <br />state and local authorities, by burning. If burned, stay out of smoke. <br />NONREFILLABLE PLASTIC CONTAINER (GREATER THAN 5 GALLONS): Non-Refillable Container. Do not reuse or <br />refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the <br />remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten <br />closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand <br />the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and <br />forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. <br />Repeat this procedure two more times. Then offer for recycling, if available or puncture and dispose of in a sanitary landfill, <br />or incineration, or if allowed by state and local authorities, by burning. If burned, stay out of smoke. <br />REFILLABLE CONTAINER: Refill this container with pesticide only. Do not reuse this container for any other purpose. <br />Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before <br />refilling is the responsibility of the refiller. Prior to refilling, inspect thoroughly for damage such as cracks, punctures, <br />abrasions, and damaged or worn out threads on closure devices. Do not refill or transport leaking containers. Check for <br />leaks after refilling and before transportation. To clean the container before final disposal, empty the remaining contents <br />from this container into application equipment or mix tank. Fill the container about 10 percent full with water. Agitate <br />vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate <br />collection system. Repeat this rinsing procedure two more times. If the container is not being refilled, return to the point of <br />purchase. <br />This product can reach groundwater as a result of mixing and loading. To minimize groundwater contamination from spills <br />during mixing, loading, and cleaning of equipment, take the following steps: <br />Mixing and Loading: The mixing and loading of spray mixtures into the spray equipment must be carried out on an <br />impervious pad (i.e., concrete slab, plastic sheeting) large enough to catch any spilled material. If spills occur, contain the <br />spill by using an absorbent material (e.g., sand, earth, or synthetic absorbent). Dispose of the contaminated absorbent <br />material by placing in a plastic bag and following disposal instructions on this label.