Laserfiche WebLink
over trees planted in rows of 8 feet apart, apply 1-1/4 to 2-1/2 pounds of atrazine per acre. Please read atrazine label(s) for <br />additional instructions. <br />NON-CROP & WOODY PLANT CONTROL <br />WEED RHAP® LV-6D and Garlon® 4 or Garlon® 3A Tank Mixtures for Non-Crop Area: Broadleaf Weed Control: Use <br />1-1/3 to 2-2/3 pints WEED RHAP® LV-6D plus 2 to 6 pints Garlon® 4 or 3 to 8 pints Garlon® 3A per acre. For wider <br />spectrum control of broadleaf weeds and woody plants, apply as a broadcast spray in enough water to deliver 20 to 100 <br />gallons total spray per acre. Apply when broadleaf weeds are actively growing. Woody Plant Control - Broadcast Foliar <br />Spray: Use 2/3 to 1-1/3 gallons WEED RHAP® LV-6D plus 1-1/2 to 3 quarts Garlon® 4 or 2 to 4 quarts Garlon® 3A per <br />acre. Apply as a broadcast spray in enough water to deliver 20 to 100 gallons total spray per acre. Apply when woody plants <br />are actively growing. Woody Plant Control High Volume Leaf-Stem Treatment with Ground Equipment: Use 2/3 to 5-1/3 <br />quarts WEED RHAP® LV-6D plus 1-1/2 to 12 pints Garlon® 4 or 2 to 16 pints Garlon® 3A per acre. Mix 1/2 to 1-1/3 quarts <br />product, plus 1-1/2 to 3 pints Garlon® 4 or 2 to 4 pints Garlon® 3A in enough water to make 100 gallons of spray. Apply at a <br />volume of 100 to 400 gallons of total spray per acre depending on size and density of woody plants. Thoroughly wet all <br />leaves, stems, and root collars of plants to be controlled. Woody Plant Control Aerial Application (Helicopter only): Use 2/3 <br />to 1-1/3 gallons WEED RHAP® LV-6D plus 3 to 4 quarts Garlon® 4 or 4 to 6 quarts Garlon® 3A per acre. Apply in a total <br />spray volume of 10 to 30 gallons per acre using drift control equipment or an effective drift control agent such as Sta-Put® <br />or Strike Zone®. Use the higher rates and volumes when plants are dense or under drought conditions. <br />WEED RHAP® LV-6D and Banvel® Herbicide tank mix for Non-Crop Areas: Annual Broadleaf Weeds: Use 1-1/3 to 2- <br />2/3 pints this product per acre plus 1/2 to 1-1/2 pints Banvel®. For wider spectrum control of broadleaf weeds and woody <br />plants, apply as a broadcast spray in enough water to deliver 20 to 100 gallons total spray per acre. Apply when broadleaf <br />weeds are actively growing. Use the higher rates when treating dense or tall vegetative growth. Perennial and Biennial <br />Broadleaf Weeds: Use 2 to 4 pints this product per acre plus 1/2 to 6 pints Banvel®. Apply as a broadcast spray in enough <br />water to deliver 20 to 100 gallons total spray per acre. Apply when broadleaf weeds are actively growing but prior to <br />flowering. Use the lower rates for biennials less than 3 inches rosette diameter. Use the higher rate for perennial weeds or <br />for biennial weeds past the 3 inch rosette stage. Woody Plant Control Broadcast, High Volume, Stem Foliage or Aerial <br />Application: Use 2/3 to 1-1/3 gallons this product per acre plus 2 to 8 quarts Banvel®. Apply as a broadcast spray in enough <br />water to deliver 20 to 100 gallons total spray per acre or apply as a high volume stem foliage spray in enough volume to <br />thoroughly wet leaves, stems, and root collars (100 to 400 gallons per acre) or apply aerially in enough water to deliver total <br />spray volume of 10 to 30 gallons per acre using drift control equipment or an effective drift control agent such as Sta-Put or <br />Strike Zone. Use the higher rates and volumes when plants are dense or under drought conditions. <br />Tank Mixes of WEED RHAP® LV-6D and Escort®, Oust® or Telar® herbicides improve control of some target species and <br />may also be tank mixed with these products for post-emergent weed control. Tank mixes have shown improved control <br />where resistant bio-types are present. <br />NOTE:All intended tank mix combinations should be used only in recommended areas on the same broadleaf weed <br />species found on both labels. For application methods and other use specifications, use the most restricted limitations from <br />labeling of both products. <br />CONDITIONS OF SALE–LIMITED WARRANTY <br />AND LIMITATIONS OF LIABILITY AND REMEDIES <br />Read the Conditions of Sale–Warranty and Limitations of Liability and Remedies before using this product. If the <br />terms are not acceptable, return the product, unopened, and the full purchase price will be refunded. <br />The directions on this label are believed to be reliable and should be followed carefully. Insufficient control of pests and/or <br />injury to the crop to which the product is applied may result from the occurrence of extraordinary or unusual weather <br />conditions or the failure to follow the label directions or good application practices, all of which are beyond the control of <br />Helena Chemical Company (the "Company") or seller. In addition, failure to follow label directions may cause injury to crops, <br />animals, man or the environment. The Company warrants that this product conforms to the chemical description on the label <br />and is reasonably fit for the purpose referred to in the directions for use subject to the factors noted above which are beyond <br />the control of the Company. To the extent consistent with applicable law, the Company makes no other warranties or