Laserfiche WebLink
x Applications to non-cropland areas are not applicable to treatment of commercial timber or other plants being grown for <br />sale or other commercial use, or for commercial seed production, or for research purposes. <br />TANK MIXES <br />Read and follow the label of each tank mix product used for precautionary statements, directions for use, <br />geographic and other restrictions. <br />CEREAL GRAINS <br />WEED RHAP® LV-6D and Buctril® ME4 for weed control on cereal grains (wheat, barley and rye): Buctril® ME4 <br />Broadleaf Herbicide will control some annual weeds that are resistant to this product and may be tank mixed with WEED <br />RHAP® LV-6D for broader spectrum weed control on small grains. In cereal areas except Washington, Oregon and Idaho, <br />use 1/3 to 2/3 pint of this product plus 1/2 to 3/4 pint of Buctril® ME4 per acre. In Washington, Oregon and Idaho: use 1/3 to <br />2/3 pint of this product plus 3/4 to 1 pint Buctril® ME4 per acre. First mix the WEED RHAP® LV-6D in water, then add the <br />Buctril® ME4. Use the higher rates for larger weeds or where weed growth is slow due to dry or cold weather. Apply before <br />weeds are 6 inches high. Use 10 to 20 gallons total spray volume per acre with ground equipment or 5 to 10 gallons total <br />spray volume with air application. Use higher volume on larger weeds. <br />The preharvest interval (PHI) is 14 days. <br />Postemergence: <br />Limited to one postemergence application per crop cycle. Maximum of 1.25 lbs. ae/acre per application. <br />Preharvest: <br />Limited to one preharvest application per crop cycle. <br />Maximum of 0.5 lbs. a.e/acre per application. <br />Limited to 1.75 lbs. a.e/acre per crop cycle. <br />WEED RHAP® LV-6D and Amber® Tank Mix for Control in Wheat, Barley, Pastures, Rangeland and Conservation <br />Reserve Program Areas: Use Amber® recommended rates and application guidelines in combination with WEED RHAP® <br />LV-6D in the following applications: <br />To control broadleaf weeds beyond optimum treatment size for Amber. <br />To control broadleaf weeds not listed on the Amber® label. <br />To control sulfonylurea resistant weeds. <br />For henbit control, apply with Amber® in early post-emergent applications. <br />WEED RHAP® LV-6D with Banvel® (or Banvel® SGF) and Ally® (or Express®) to provide more complete Kochia <br />control:Offers quick burndown. Provides residual activity with Ally to control later weed flushes making harvesting easier <br />and reducing post-harvest weed control needs. Controls broader weed spectrum while offering better control of Russian <br />thistle, mustards, flixweed and wild buckwheat. Allow for early treatment. Apply 5.3 ounces of this product with 0.1 ounce of <br />Ally plus either 2 to 3 ounces of Banvel® or 4 to 6 ounces of Banvel® SGF per acre. The tank mix can be applied to winter <br />wheat from the four-leaf stage (tillering) to prior to joint. It can be applied to spring wheat from the four-leaf stage through <br />the five-leaf stage. Growers who want to rotate to a sensitive crop following wheat and are concerned about carryover from <br />Ally® can substitute Express® in the tank mix which allow crop rotation 60 days after application. The recommended rate of <br />Express® is 1/6 ounce per acre. <br />WEED RHAP® LV-6D and Peak® for Post-emergent Weed Control in Grain Sorghum:Use 2-1/2 to 5 ounces per acre <br />of WEED RHAP® LV-6D in combination with Peak® herbicide. Application should be made as a directed spray when <br />sorghum reaches 5-8" or 8-24" in height. For Applications in Wheat, Barley and Rye: Use the lower tank mix rate for Peak® <br />in conjunction with 5 to 8 ounces per acre of WEED RHAP® LV-6D to control thistles and field bindweed. Application limited <br />to spring after tillering and prior to jointing. For Control of Kochia (1-6"), Lambsquarter (1-6"), Morningglories (1-6") and