Laserfiche WebLink
i <br /> 1. Continuous miners equipped with a Proximity Detection system must <br /> a. Stop before contacting a miner, while repositioning <br /> b. Give a visual warning on the machine <br /> c. Stop before contacting a miner' moving from place to place <br /> d. All the above <br /> 30CFR 75.1732(b)(1) <br /> 2. The miner wearable component (locator) must provide an audible and visual warning signal, to <br /> alert the miner before the proximity causes the machine to stop? <br /> a. True <br /> b. False <br /> 30CFR 75.1732(B)(2) <br /> 3. If the machine mounted Proximity Detection System is not functioning properly: <br /> a. It must not be moved until repaired <br /> b. Must be immediately locked out of service <br /> c. Can be relocated to a safe place for repairs, if it provides a distinguishable warning signal <br /> while moving <br /> d. It must not affect the performance of the Continuous miner electrical system <br /> 30CFR 75.1732(b)(4) <br /> 4. When must the machine mounted Proximity Detection System be checked? <br /> a. On the weekly permissibility exam <br /> b. Immediately prior to the machine being operated <br /> c. Within 1 hour, if the shift change occurs without an interruption in production <br /> d. All the above <br /> 30CFR 75.1732(c)(i)(ii)(iii) <br /> 5. At the completion of a machine mounted Proximity Detection System components check, an <br /> Operators certified person, must certify by initials, date, and time, that the check was <br /> completed and record it by the end of the shift? <br /> a. True <br /> b. False <br /> 30CFR 75.1732(d)(1) <br /> 6. A record of the defects found as a result of the miner wearable components check, must be? <br /> a. Recorded, including corrective actions and dates of corrective actions <br /> b. Transmitted to MSHA within 24 hours <br /> c. Put in the monthly electrical exam book <br /> d. None of the above <br /> 30CFR 75.1732(d)(2) <br />