Laserfiche WebLink
<br />l • <br />)• <br />) <br />1 <br /> <br />chosen as "base" years. NBl' can have a maximum value of 8. IHl' <br />as described ear liar is an array which contains all the years to <br />be selected as "base' years. The data for the "base' years are <br />definded by ID, CODE and I'fR. The ID, CODE and IYR should be in <br />ascending order. During execution of WATBALP. the CFIL will be <br />scanned for input data if such data have not been obtained from <br />PFIL. The program will check ID. CODE and IYR. If ID and CODE. <br />are found to match and IYR is equal to IHYfI), then the <br />corresponding C array will be selected as input data for node ID. <br />File PFIL for WATBALP is to be produced by the model user,. <br />Its purpose is to allow user to supply data which may. nut be <br />present in the ealibrati,on.daea file. Thus, the user can urge <br />this file to include data for a new node. Because WALBALP <br />searcnes through PFIL initially for the necessary data,. Chis file <br />also can be used to override the data for any given node(s) <br />present in CFIL. FIIe PFIL for WATHHLP has exactly the same <br />structure as CONFIL in WATBALC. <br />•. .. .c <br />The DICT.DAT used by WATBALP is the same station-description <br />file as that used by WATBALC. <br />Atl the outputs from WATBALP will br similar to those from <br />WATBALC. The WATBALP module tabulates four different types of <br />outputs. -If the tabulated data are read in from the calibrated <br /> data file (CFIL), they are designated by 'B" for ambient <br />j (baseline) input. If the data are read in from the mine-plan <br /> data file (PFIL), then they are designated by "U" for user input. <br />~ <br /> If the data are computed from upstream nodes, then they are <br />~ designated by "P' for predicti on hosed o n the e ffects of the <br /> mine-plan data inputs. The difference between the two Cthe <br /> " <br />" " <br />" <br /> B <br />ambient baseline condition ( or <br />P <br />) m inus the mine-impacted <br /> computation f"P")I is designated as "D". [f for a node. the "S" <br />~~~4.== <br />.L. <br />Fx. 13-19 <br />