Laserfiche WebLink
_ .r.., <br />2 - print only load <br />3 - print both concentration and load <br />~• <br />~ For examples: <br />~ IPI3)=3 (or 03) indicates dissolved solids concentration <br />and load will be printed with no plot. <br />~ IP(6)=30 indicates calcium concentration and load will <br />be plotted but not printed. <br />~ IP(10)=11 indicates bicarbonate concentration <br />will be printed and plotted. <br />The load is computed according to the following equation; <br />Load (tons/day) ~ concentration lmg/1) <br /> + streamflow (cfs) + K <br /> <br /> where K is a conversion factor equal to .0026915. <br />~ The WATBAL does not perform load calculations or load <br /> i <br /> outputs for stream flow and specif <br />c conductance. <br /> As discussed previously, each element of IP is affected by <br />~ the corresponding element in IA. If IA for a variable is zero <br />indicating that no estimated values is to be made, then there <br />will be no print listing or plot for that variable even though <br />~ the variable's IP at a particular node is nonzero. In addition, <br />IA's of SC,- DS and TSS can influence the printing or plotting of <br />variables as groups (see description on IA above for details). <br />~ If outputs are to be printed. the module will read from file 'N <br />DICT.DAT to access descriptions of the nodes. If the information <br />of a node is not available from the file, the program will print <br />~ "NO DESCRIPTION" on the outputs for Chas particular node. <br />The DICT.DAT file should be supplied by the module user <br />~ according to the Folluwiny format; <br />Ex. 13-13 <br />