Laserfiche WebLink
<br />9 <br /> <br />second set of adequacy comments was sent by the Division on March 1, 2005, and <br />responses were received on March 18, 2005. These responses were determined to satisfy <br />the Division. No public comments were received. A letter was received by the Bureau of <br />Land Management (BLM) on March 8, 2005, stating that MCC’s plan was adequate to <br />meet all current Federal regulations regarding the Resource Recovery Protection Plan <br />(R2P2). The U.S. Forest Service sent a letter of concurrence with an approval decision <br />on March 17, 2005. Letters were received from the Colorado State Historic Preservation <br />Officer (SHPO) on December 1, 2004, and from the State Engineer’s Office on <br />December 3, 2004, indicating there were no comments or objections. The proposed <br />decision to approve PR-11 was issued on April 8, 2005. <br /> <br />The application for PR-10, the addition to the permit area of E-seam longwall panels 1 <br />through 9 and associated development entries in the South-of-Divide area, was received <br />by the Division on April 2, 2004, and was deemed complete for the purposes of filing on <br />April 8, 2004. Mining of the E seam in panels 10, 11, and 12 was approved in a previous <br />revision. Tables 1 and 2, below, summarize the chronology of adequacy letters and <br />responses between the Division and MCC for Permit Revision No. 10, and the <br />chronology of comments received by the Division and their resolution. <br /> <br />Table 1 – PR-10 adequacy review chronology. <br /> <br /> <br />Date DMG sent <br />adequacy letter to <br />MCC <br /> <br />Date DMG received <br />responses from <br />MCC <br /> <br /> <br /> 7/6/2004 11/30/2004 <br /> 2/24/2005 6/13/2005 <br /> 11/4/2005, <br />12/16/2005 3/20/06, 4/1//06 <br /> 5/5/2006 5/16/06, 5/22/06 <br /> <br />The proposed decision to approve Permit Revision 10, with new stipulations, was issued <br />on June 2, 2006. <br /> <br />