Laserfiche WebLink
GCC Energy, LLC <br />GCC -14-16 <br />160 <br />GCC -14-17 <br />190 <br />GCC -14-18 <br />220 <br />GCC -14-19 <br />190 <br />GCC -14-20 <br />195 <br />GCC -14-21 <br />220 <br />GCC -14-22 <br />215 <br />GCC -14-23 <br />220 <br />GCC -14-24 <br />190 <br />The water source for drilling is located 2 miles from the access road; it is anticipated that two to three <br />holes can be supplied with one truck load. As such, approximately 10 water truck roundtrips would be <br />necessary. <br />(E) Plans for Transfer and Modification of Exploration Drill Holes to be used as <br />Surveillance, Monitoring, or Water Wells <br />There are no plans for transfer and modification of exploration drill holes to be used as surveillance, <br />monitoring, or as a water well in this drilling plan. <br />3482.1 (a) (3) (v) Estimated Timetable for conducting and completing each Phase of the <br />Exploration, Drilling, and Reclamation <br />The estimated time per hole is 30 hours, which includes mobilization, drill, core, and demobilization for <br />each site. The proposed work schedule is a 5 -day work week of approximately 10 hours per day. Weather <br />conditions may alter the anticipated time frame. With one drill rig expected to be utilized, the exploration <br />could be completed in late October 2014, assuming cooperating weather and road conditions, as well as a <br />drilling start-up in early September 2014. A late start could result in winter weather delays, which could <br />result in drilling completion during 2015. <br />Reclamation would take approximately 10 hours per hole, given the minimal amount of disturbance. A <br />total of 24 days is anticipated with some additional time included for unforeseen complications. <br />3482.1(a) (3) (vi) Estimated Amounts of Coal to be Removed during Exploration, <br />Description of Method to be Used to Determine Those Amounts, and the Proposed Use of <br />the Coal Removed. <br />The exact thickness of the coal seam will be determined by the proposed exploratory drilling. The coal <br />thickness varies from 5 to 10 feet in the current, nearby mining operation. With utilizing a 5.50 -foot <br />average coal thickness, an estimate of 30 pounds of coal per hole would be retained and submitted for <br />laboratory analysis. This estimate is utilizing 80 pounds per cubic feet for a 7.50 -foot column of 0.25 -foot <br />core sample (cross sectional area of approximately 6 inches). Historical data from drill holes outside but <br />relatively adjacent to the exploration area, list numerous 2 -foot intercepts. However, it is not anticipated <br />that drill holes in the exploration area would encounter increased thickness greater than the current <br />mining activity. <br />Federal Coal Exploration Pian <br />May 2094 <br />9 <br />