Laserfiche WebLink
Transit Mix Concrete Co. <br /> Plant <br /> At the start of mining operations, a portable plant will be used to crush and screen the rock. The <br /> portable plant will use a jaw crusher, cone crushers, a scalping screen and up to two finish <br /> screens. Once the plant pad has been excavated within the Quarry footprint and the Quarry <br /> sufficiently developed, after approximately 4 years, the permanent plant will be located within the <br /> pit extents as shown on Figure C-4. The permanent plant will use a jaw crusher, two cone <br /> crushers, a scalping screen, and two finish screens, which will be similar in function, but larger <br /> than, the portable plant. A separate, smaller riprap plant consisting of a grizzly feeder and <br /> associated conveyor belts will also be included with the permanent plant facility. The permanent <br /> plant equipment will be electric powered with power supplied by the local electric utility, and the <br /> portable plant will be electric powered with power generated on site during the development <br /> period. The permanent plant components are listed below in Table D-5. Transit Mix has sized <br /> the equipment, but the manufacturer has not been selected; therefore, the manufacturer may <br /> change for some or all of the components. Similarly sized equipment will be used regardless of <br /> the manufacturer. <br /> Hitch Rack Ranch Quarry Permit Application <br /> March 20,2018 D-14# <br />