Laserfiche WebLink
Newmont Mining Corporation <br /> Cripple Creek&Victor Gold Mine <br /> HGM Platform Extension CQA <br /> NewFields Job No.475.0106.019 <br /> Tuesday,August 15,2017 <br /> FIELD DAILY PROGRESS REPORT <br /> PROJECT: HIGH GRADE MILL(HGM)PLATFORM EXTENSION <br /> SITE: CRIPPLE CREEK&VICTOR GOLD MINE(COLORADO) <br /> CONTRACTOR: SCHMUESER ASSOCIATES <br /> DATE: TUESDAY,AUGUST 15, 2017 <br /> TEMPERATURE: LOW: 36°F TO HIGH:69°F <br /> WEATHER: MOSTLY CLEAR, CLOUDY IN THE AFTERNOON <br /> NEWFIELDS PERSONNEL ONSITE: ERIC NIEBLER, FIELD TECHNICIAN <br /> 1.0 EARTHWORKS <br /> 1.1 General <br /> Slopes below the berms were laid back to a 2H:1V angle in order to meet the design criteria for <br /> the platform extension. Berms along the edge of road beneath the mill platform were <br /> continually raised to appropriate heights as the road was raised as lifts of select structural fill <br /> were placed. <br /> 1.2 Subgrade <br /> Existing slopes between the mill platform and road beneath it were cleaned of unsuitable <br /> material, primarily large cobbles and boulders, with an excavator and then compacted with the <br /> roller in order to provide a competent surface for the select structural fill to tie in with. <br /> 1.3 Select Structural Fill (SSF) <br /> Select structural fill was transported and dumped using two Volvo A4OF articulated dump trucks <br /> (approximately 25 CY per load). The fill was spread using a Volvo H061 loader to a maximum, <br /> loose thickness of 12 inches and compacted with a BW211 Bomag roller using a method <br /> specification for compaction. <br /> NEWFIELDS AND/OR CONTRACTOR FDELD/LABORATORY TESTING <br /> Two samples of select structural fill were collected and tested for moisture content on site by <br /> NewFields personnel. The fill tested at 9.0 and 9.5 percent moisture content, within the <br /> allowable range. <br /> Page 1 <br />