Laserfiche WebLink
ACZ Laboratories, Inc. Bottle Order <br /> 2773 Downhill Drive Steamboat Springs, CO 80487 (800)334-5493 Packing LIS t <br /> Account: GOLDER/Golder Associates Bill to Account: ill to ACZ <br /> Bottle Order: D038808 Ship Date Requested: 11/13/2017 <br /> Internal Note: Request Placed at: 11/13/201716:16 <br /> Service Requested: iI enver Pick Up <br /> General Sampling Techniques and Instructions <br /> Inspect the sample containers provided in the sample kits. If any of the preservative has leaked notify your proj ct manager or client <br /> services contact as soon as possible. <br /> The sample containers are packaged in separate polyurethane bags or in bubble wrap for larger sample contai rs representing the total <br /> number of samples you need to collect. Ten bags of bottles equal 10 samples to be collected. Treat each sam le container package as a <br /> set,sample from the same place and at the same time for all containers in the set. <br /> The sample containers can be identified by the colored dot on the side of the container. A RED container type II have a red dot on its <br /> side. Raw/unpreserved container types do not have a colored dot. <br /> Except for RAW container types,each container has a preservative specific to the analysis you have requested. Do not rinse any <br /> container and take care not to lose any of the preservative when filling containers with your sample. <br /> I <br /> Some samples collected for inorganic constituents should be field filtered. If you are unable to perform the filtra .n in the field please <br /> notify your project manager so the samples can be properly prepared when they arrive at the lab. The"Filter/Rail/Preserve"column above <br /> shows what containers should be field filtered. There are many techniques for field filtering,however,when usin tubing or pumps,please <br /> ensure your equipment is as clean as possible to diminish contamination affects. The filter should typically be.• urn pore size unless <br /> otherwise stated in"Sampling Instruction Specifics"page of this packet. You may also send a"Field Blank"with,our sample(using the <br /> same equipment for sample filtering)to determine any field contamination problems. <br /> Completely fiN containers with your sample to the shoulder of the container. All 40 mL vials require"Zero Heads.:ce";make sure no air is <br /> present in the container for these samples. <br /> Make sure all caps are tight for shipment. Clean any debris from the outside of the containers. Label all contain= with the provided <br /> labels for your sample. Use a waterproof marker to write on the label. For each label fill in at a minimum the Co pany,Sample ID, <br /> Sample Date and Time. Also check whether the sample was filtered or not. <br /> Place the entire sample set back into the original polyurethane bag. Cool the samples to 0°C to 4°C,place uprig in a similar <br /> configuration within the cooler provided.Place the frozen ice packets around the samples and seal for return ship ent. All samples other <br /> than Red,Green and Mercury by Method 1631 should be cooled to 0°C to 6°C for return shipment. For sample s: s with short hold times <br /> please send the cooler via an overnight shipping company to ACZ. <br /> In ACZ's ongoing effort to improve quality the use of custody seals(CS)has been implemented. For security pu .1.ses the CS should be <br /> applied to the sample cooler and cooler lid when samples are shipped back to ACZ. The condition of the seal,up n receipt,is indicative if <br /> the cooler has been tampered with during the time in transit. Apply the CS on the opening side of the container,s•n and date the CS,and <br /> cover the CS with clear packing tape. Upon receipt of the container at the lab any damage will be reported to the 'A/QC Officer. <br /> REPAD.04.06.05.01 Page 2 of 2 <br /> L41229-1712200847 Page 25 of 25 <br />