Laserfiche WebLink
SAFETY DATA SHEET <br />EN/ACTT'" DVS4C005 <br />irritation <br />Respiratory or skin <br />sensitization <br />Carcinogenicity <br />Reproductive effects <br />Germ cell mutagenicity <br />Teratogenicity <br />STOT - single exposure <br />STOT - repeated exposure <br />Aspiration toxicity <br />Components <br />Acute inhalation toxicity <br />Human Hazard Characterization <br />no data available <br />No component of this product present at levels greater than or equal to 0.1 % is <br />identified as probable, possible or confirmed human carcinogen by IARC. <br />No toxicity to reproduction <br />Contains no ingredient listed as a mutagen <br />no data available <br />no data available <br />no data available <br />No aspiration toxicity classification <br />POLY(DIALLYL-DIMETHYL-AMMONIUM CHLORIDE) <br />LC50 rat: > 20 mg/I <br />Exposure time: 4 h <br />Based on our hazard characterization, the potential human hazard is: Low <br />12. SECTION ECOLOGICAL INFORMATION <br />Ecotoxicity <br />Environmental Effects <br />Product <br />Toxicity to fish <br />Toxicity to daphnia and other <br />aquatic invertebrates <br />Toxicity to algae <br />Persistence and degradability <br />Harmful to aquatic life. <br />LC50 Pimephales promelas (fathead minnow): 18 mg/I <br />Exposure time: 96 h <br />Test substance: Product <br />no data available <br />no data available <br />Greater than 95% of this product consists of inorganic substances for which a biodegradation value is not <br />applicable. <br />Mobility <br />The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation program <br />interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between the total <br />input and output. The level III model does not require equilibrium between the defined media. The information <br />provided is intended to give the user a general estimate of the environmental fate of this product under the <br />defined conditions of the models. <br />If released into the environment this material is expected to distribute to the air, water and soil/sediment in the <br />approximate respective percentages; <br />Air <5% <br />Water 30 - 50% <br />5/7 <br />