Laserfiche WebLink
5. Describe proposed surface excavation or other land disturbance, including roads, pits, <br /> trenches,waste piles, drill pads and collar areas of underground workings,ponds, etc. <br /> In order to minimize impact, proposed drill sites will be accessed by existing historic <br /> logging and mining roads. Drilling will occur in the road rather than constructing a <br /> designated drill pad. The histeriG read will be widened from existin <br /> to approximately 25 ft. at each drill hole site for a linear distance of about 50 ft. Each drill <br /> site will be leveled and cleared only enough o allow sae operation ot the drill rig. Mud <br /> nits will not he required as water will he contained in tuhs_ Exploration holes will he <br /> backfilled with bentonite and sealed with cement immediately upon completion. <br /> 6. Proposed Disturbance (approximate) Describe the proposed drilling to be conducted, <br /> including anticipated number of holes, diameter, depth,location, etc. Submit additional <br /> pages if necessary: <br /> A. Drill Pads: <br /> Average Average <br /> Quantity 0 Width (ft) Length (ft) <br /> B. Drill Holes: <br /> Diameter <br /> Quantity 20 Depth (ft) 175 (in) 6 <br /> C. Mud Pits <br /> Average Average Average <br /> Quantity 0 Width (ft) Length (ft) Depth (ft) <br /> D. Described proposed underground work, including reopening of old workings, <br /> advancement of adits or shafts, trenches, pits, cuts, rock dumps, or other types of <br /> disturbance,describe type, quantity and general dimensions: <br /> No underground work is proposed. <br /> Form 2—Public File Page 6 of 14 <br />