My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2017-06-01_PERMIT FILE - C1996083A
DRMS
>
Day Forward
>
Permit File
>
Coal
>
C1996083
>
2017-06-01_PERMIT FILE - C1996083A
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
7/2/2018 8:18:38 AM
Creation date
6/14/2017 6:50:23 AM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1996083A
IBM Index Class Name
Permit File
Doc Date
6/1/2017
Doc Name
pages 2.05-84 to 2.05-165
Section_Exhibit Name
Volume I 2.05 Operation and Reclamation Plans Part 2
Media Type
D
Archive
Yes
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
97
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
(3) Protection of Hydrologic Balance <br />(a)(i) The applicant has prepared a drainage and sediment control system which <br />will minimize changes to the surface water and to the prevailing hydrologic <br />balance in the facilities area by detaining run-off in sediment ponds or <br />treating runoff with alternative sedimentation control. The sediment ponds <br />are designed to contain the run-off from the 10 year precipitation event. The <br />sedimentation control plan is presented in Volume III, Exhibit 8, and on Maps <br />20, 21-1, 21-2, 21-3, 21-4, 22-13, 22-C, 22J, 22-K, 35, 36, 36a and Volumes <br />IV, IX and XI. <br />There is very little if any beneficial use made of surface run-off from the <br />ephemeral drainages in the permit and adjacent areas. These ephemeral <br />drainages typically only flow during spring snowmelt and significant <br />precipitation events. Sediment ponds B & C should alleviate the problem of <br />the ditches (Deer Trail Ditch & Fire Mountain Canal) plugging with sediment <br />and/or completely washing out do to previously uncontrolled runoff events. <br />The construction of mine entries, ventilation shafts and the mining of the coal <br />could cause water to move from formations above the coal seam into the <br />mine. This potential water migration would be magnified by roof collapse and <br />fracturing caused by subsidence. Although the permeability of the coal seam <br />and surrounding strata is low and the quantity of water stored in the formation <br />is also low, some water will occasionally seep into the mine. <br />The Freeman Gulch vent shaft was raise bored to an 8 -foot diameter. The <br />shaft was lined with a 6 -foot diameter steel casing. The steel casing was <br />grouted through the water bearing zone which is approximately 0 to 140 feet <br />deep. The grout liner through this zone is approximately 1 -foot thick. To <br />prevent surface drainage from entering the shaft, the steel liner was <br />extended at least 3 -feet above the ground surface (see Map 35). A screen <br />was placed on the top of the steel liner. The Freeman Gulch shaft has been <br />backfilled a capped with concrete. This backfill will protect the integrity of the <br />grouted liner to contain the water bearing zone. The concrete cap will ensure <br />no surface run-off will enter the backfilled shaft. Thus, the shaft backfill and <br />concrete shaft will protect the hydrologic balance. <br />MR -168 2.05-106 12/14 <br />
The URL can be used to link to this page
Your browser does not support the video tag.