Laserfiche WebLink
Custom Soil Resource Report <br /> Information in this table is intended for land use planning, for evaluating land use <br /> alternatives, and for planning site investigations prior to design and construction. <br /> The information, however, has limitations. For example, estimates and other data <br /> generally apply only to that part of the soil between the surface and a depth of 5 to 7 <br /> feet. Because of the map scale, small areas of different soils may be included within <br /> the mapped areas of a specific soil. <br /> The information is not site specific and does not eliminate the need for onsite <br /> investigation of the soils or for testing and analysis by personnel experienced in the <br /> design and construction of engineering works. <br /> Government ordinances and regulations that restrict certain land uses or impose <br /> specific design criteria were not considered in preparing the information in this table. <br /> Local ordinances and regulations should be considered in planning, in site <br /> selection, and in design. <br /> Report—Source of Sand and Gravel (TZA - Gravel) <br /> [Onsite investigation may be needed to validate the interpretations in this table and <br /> to confirm the identity of the soil on a given site. The numbers in the value columns <br /> range from 0.00 to 0.99. The larger the value, the greater the likelihood that the <br /> bottom layer or thickest layer of the soil is a source of sand or gravel] <br /> Source of Sand and Gravel—Huerfano County Area,Colorado <br /> Map symbol and soil name Pct.of Potential as a source of gravel Potential as a source of sand <br /> map unit <br /> Rating class and limiting Value Rating class and limiting Value <br /> features features <br /> 51—Neville fine sandy loam,3 <br /> I to 9 percent slopes <br /> Neville 80 Poor Poor <br /> Bottom layer 0.00 Bottom layer 000 <br /> Thickest layer 0.00 Thickest layer 0.00 <br /> 63—Otero fine sandy loam, 1 <br /> to 9 percent slopes <br /> Otero 75 Poor Fair <br /> Bottom layer 0.00 Bottom layer 0.03 <br /> Thickest layer 0.00 Thickest layer 0.09 <br /> 67—Potts sandy loam, 1 to 8 <br /> percent slopes <br /> Potts - _ 85 Poor _- _I Fair _--- <br /> Bottom layer 0.00 Thickest layer 0.01 <br /> Thickest layer 0.00 Bottom layer 003 <br /> Soil Chemical Properties <br /> This folder contains a collection of tabular reports that present soil chemical <br /> properties. The reports (tables) include all selected map units and components for <br /> each map unit. Soil chemical properties are measured or inferred from direct <br /> 23 078 <br />