Laserfiche WebLink
TABLE 3.MATERIAL PROPERTIESCLIENT: New FieldsPROJECT: Cripple Creek MLE 2Date Received:6/24/2016QC'd By:Date Reported:7/1/2016TRI Job No.:Client Sample ID:#3 P-1706TRI Control No.:Material Description:80mil LLDPE Double Sided Microspike GeomembraneSPECIMENSProj.12345678910Avg.Std. Dev.Min MaxSpecs.METHOD DESCRIPTIONASTM D5994 Thickness (mils)Apparatus: Dead-weight dial micrometer with gauge points tapered at an angle of 60o +/- 2o to the horizontal with the tip rounded to a radius of 0.8+/-0.1 mm(0.031+/-0.004 in), with a specified force of 0.56+/-0.05 N (2+/-0.2 oz) Loading Time: 5 sec Specimen Size: 4" x 4"81.7 81.9 81.4 83.3 81.8 81.5 83.2 81.6 83.0 81.3 82.1 0.881.3 83.3ASTM D792 Specific Gravity (23/ 23oC)Method A0.9339 0.93360.9338 0.00030.9336 0.9339ASTM D6693 Tensile Properties:Type IVTest Specimens: Type IV, Width of narrow section:0.25in, Length of narrow section:1.3in, Width Overall:0.75in, Length Overall: 4.5in Conditioning: Conducted test in standard laboratory atmosphere of 23+/-20C (73.4+/-3.60F), and 113847G160663Length Overall: 4.5in Conditioning: Conducted test in standard laboratory atmosphere of 23+/-2C (73.4+/-3.6F), and 50+/-5% relative humidity. Rate of Separation: 2"/min Tensile Strength at Break (lbs/ in.- width)MD222 243 247 246 241240 10222 247TD246 263 264 256 248256 8246 264 Elongation at Break (percent, %)Gauge Length = 2.0 in. MD479 535 537 551 514523 28479 551TD556 595 601 553 510563 37510 601ASTM D4833 Puncture Resistance (lbs) Specimens were tested as directed in Test Method D4833. They were clamped without tension between circular plates of a ring clamp attachment secured in the tensile machine. Test specimens were extended beyond the outer edges of the clamping plates.158 161 161 164 160 159 160 158 158 153 159 2153 164161 161 159 159 159ASTM D5596 Carbon Black Dispersion (category rating per reference chart PCN: 12-455960-38)1 1 1 1 1 1 1 1 1 1ASTM D4218 Carbon ContentApparatus: Muffle Furnace2.30 2.372.33 0.052.30 2.37(End of Table 3)(Sheet 1 of 1)10 out of 10 in Category 1By accepting the data and results presented on this report, the Client agrees to limit the liability of TRI Environmental, Inc. from Client and all other parties for claims on issues, due to the use of this data, to the cost for the respective tests presented in this report; and the Client agrees to indemnify and hold harmless TRI Environmental, Inc. from and against all liabilities in excess of the aforementioned limit.LEGENDS:MD - MACHINE DIRECTIONTD- TRANSVERSE DIRECTION1160 North Gilbert Street, Anaheim, CA 92801, www.precisionlabs.net Precision Geosynthetic Laboratories International dba TRI Environmental, Inc.