Laserfiche WebLink
TABLE 1.MATERIAL PROPERTIESCLIENT: New FieldsPROJECT: Cripple Creek MLE 2Date Received:6/24/2016QC'd By:Date Reported:7/1/2016TRI Job No.:Client Sample ID:#1 P-1662TRI Control No.:Material Description:80mil LLDPE Double Sided Microspike GeomembraneSPECIMENSProj.12345678910Avg.Std. Dev.Min MaxSpecs.METHOD DESCRIPTIONASTM D5994 Thickness (mils)Apparatus: Dead-weight dial micrometer with gauge points tapered at an angle of 60o +/- 2o to the horizontal with the tip rounded to a radius of 0.8+/-0.1 mm(0.031+/-0.004 in), with a specified force of 0.56+/-0.05 N (2+/-0.2 oz) Loading Time: 5 sec Specimen Size: 4" x 4"81.4 81.1 81.3 81.8 81.5 81.0 82.2 82.6 81.2 82.4 81.7 0.681.0 82.6ASTM D792 Specific Gravity (23/ 23oC)Method A0.9366 0.93480.9357 0.00130.9348 0.9366ASTM D6693 Tensile Properties:Type IVTest Specimens: Type IV, Width of narrow section:0.25in, Length of narrow section:1.3in, Width Overall:0.75in, Length Overall: 4.5in Conditioning: Conducted test in standard laboratory atmosphere of 23+/-20C (73.4+/-3.60F), and 113845G160663Length Overall: 4.5in Conditioning: Conducted test in standard laboratory atmosphere of 23+/-2C (73.4+/-3.6F), and 50+/-5% relative humidity. Rate of Separation: 2"/min Tensile Strength at Break (lbs/ in.- width)MD242 222 244 251 239240 11222 251TD270 248 255 272 279265 13248 279 Elongation at Break (percent, %)Gauge Length = 2.0 in. MD527 475 541 493 508509 26475 541TD596 554 571 601 621588 26554 621ASTM D4833 Puncture Resistance (lbs) Specimens were tested as directed in Test Method D4833. They were clamped without tension between circular plates of a ring clamp attachment secured in the tensile machine. Test specimens were extended beyond the outer edges of the clamping plates.162 160 161 162 160 172 168 164 168 168 164 4154 172164 165 166 162 154ASTM D5596 Carbon Black Dispersion (category rating per reference chart PCN: 12-455960-38)1 1 1 1 1 1 1 1 1 1ASTM D4218 Carbon ContentApparatus: Muffle Furnace2.38 2.322.35 0.042.32 2.38(End of Table 1)(Sheet 1 of 1)10 out of 10 in Category 1By accepting the data and results presented on this report, the Client agrees to limit the liability of TRI Environmental, Inc. from Client and all other parties for claims on issues, due to the use of this data, to the cost for the respective tests presented in this report; and the Client agrees to indemnify and hold harmless TRI Environmental, Inc. from and against all liabilities in excess of the aforementioned limit.LEGENDS:MD - MACHINE DIRECTIONTD- TRANSVERSE DIRECTION1160 North Gilbert Street, Anaheim, CA 92801, www.precisionlabs.net Precision Geosynthetic Laboratories International dba TRI Environmental, Inc.