Laserfiche WebLink
#22 Culvert C-5 is a 60" Diameter culvert. Most likely the 12" listing was a typographical error. Culvert <br />C-78 was removed when that area was reclaimed in 2005 and Phase I bond released. Table 21 has been revised <br />to address these issues and is included with this submittal. <br />DRMS 7 September 2016: Revised page 26 appears incorrectly paginated and does not flow correctly <br />from page 27 in the permit. DRMS received one page each for revised page numbers 26 and 28. <br />Culvert numbers begin at 1 and progress through 16C on page 26, then begin on submitted page <br />28 at C51. Complete footnote information is missing on page 28. <br />k) Please verify that Table 21 Culverts contained in contained in Section 2.05.3(3) is part of Exhibit 19 of <br />the permit. <br />1) Please resubmit Table 20 Culverts, in its entirety beginning the table on page 27 assuring that column <br />names for each column appear at the top of each page and include all footnote information as revised <br />pages referencing in the footer, section 2.05.3(3) and if appropriate, Exhibit 19. <br />M) Please also resubmit page 27 T(R70) in the permit document leaving off information pertaining to <br />Table 21. <br />n) Begin Culvert C14 is now listed on table 21. Please add the value for the modeled 10 -24 hour peak <br />Discharge in cubic feet per second (cfs) to table 21. <br />o) Below C14 on Table 21, two lines reference in the notes structures removed in 2011 please indicate the <br />culvert numbers. <br />Maps 13 and 14 have been revised to address on the ground issues identified by DRMS personnel during <br />monthly inspections and then included as adequacy issues. These maps will be submitted separately as soon as <br />our Professional Engineer has completed his review. <br />DRMS 7 September 2016: DRMS received the above referenced maps and is currently reviewing that <br />information. <br />New Elk Adq Review #5 Page 3 <br />September 2016 Prepared by: R. Reilley file: M:\Coal\rar\1NewElk\RN6_ADQ <br />