Laserfiche WebLink
Metals By Method SW846 7471B <br /> Matrix: SO Batch ID: MP18633 <br /> * All samples were digested and analyzed within the recommended method holding time <br /> ■ All method blanks for this batch meet method specific criteria. <br /> ■ Sample(s) D82159-1MS,D82159-IMSD were used as the QC samples for the metals analysis <br /> Wet Chemistry By Method SM254OG-2011 M <br /> Matrix: SO Batch ID: GN34331 <br /> • The data for SM2540G-2011 M meets quality control requirements <br /> Wet Chemistry By Method SW846 9045D <br /> Matrix: SO Batch ID: GN34398 <br /> ■ The following samples were run outside of holding time for method SW846 9045D- D82159-1 <br /> Wet Chemistry By Method SW846 9056A <br /> Matrix: SO Batch ID: GP17796 <br /> a All samples were prepared and analyzed within the recommended method holding time. <br /> • All method blanks for this batch meet method specific criteria. <br /> • Sample(s) D82092-1MS,D82092-IMSD were used as the QC samples for the Fluoride analysis. <br /> a D82159-1 for Fluoride:Elevated detection limit due to matrix interference. <br /> AMS certifies that data reported for samples received,listed on the associated custody chain or analytical task order,were produced <br /> to specifications meeting AMS's Quality System precision,accuracy and completeness objectives except as noted. <br /> Estimated non-standard method measurement uncertainty data is available on request,based on quality control bias and implicit for <br /> standard methods Acceptable uncertainty requires tested parameter quality control data to meet method criteria. <br /> AMS is not responsible for data quality assumptions if partial reports are used and recommends that this report be used in its <br /> entirety.This report is authorized by AMS indicated via signature on the report cover <br /> Tuesday,May 10,2016 Page 2 of 2 <br /> 5 of 46 <br /> SGS ACCIJTEST <br /> D82159 <br />