Laserfiche WebLink
Q. Support Facilities <br />1. Buildings <br />Existing buildings include a cinder block building (16' x 32') to be used as a conference and <br />training facility, a metal shop building (33' x 45) to be used as a warehouse, a cinder block <br />storage building (25' x 90) also to be used for warehousing, a foreman's trailer (10' W x 37' L x <br />8' H), a parts semi -truck trailer (8' W x 40' L x 8' H), a pre-engineered metal -frame -metal clad <br />repair shop (52' x 85') with outside equipment wash pad, an oil separator that is attached to the <br />wash pad to separate oil from the wash water, a 10'x 10' furnace room attached to the north end <br />of the repair shop, a metal -frame -metal clad bath house 24'x 34), and a fuel and lube oil storage <br />and pump facility consisting of storage vessels contained inside a lined earthen berm that will <br />contain the volume from the largest vessel plus the 10yr-24hr rainfall event, and a frame house <br />(24' x 40) in use as the mine office all located at the NH2 facilities area. A proposed hay shed <br />(40'W x 60'L x 18'H) will be constructed by the property owner on the TMR47, LLC tract near <br />Pond 007 and remain as a permanent structure. Map 2.05.3(3)-1 shows the locations of the <br />existing buildings. <br />Details of sizes and types of construction for all buildings are shown in the following table. <br />Page 2.05.3(3)-39 January 2016 (TR -70) <br />