Laserfiche WebLink
process solution are returned to the mill . No hazards or conditions exist to warrant <br /> any further follow up actions. <br /> (e) results of the Operator's investigation to assess the conditions or circumstances that <br /> created the emergency situation, and what corrective or protective measures will be <br /> taken to prevent a similar event from occurring in the future.—The spill was caused <br /> by failure of dart valves on#5 floatation tank. The darts separated from the control <br /> shaft leaving the valves in a closed state causing slurry inflow to overflow the tank. <br /> At the time of the failure all process conditions were in line with flowsheet <br /> expectations. The valves were repaired with additional measures installed to prevent <br /> any similar future failure. <br /> I believe the responses above address the required follow up information. Should you require <br /> further information please do not hesitate to contact me at(719) 689- 4055 or <br /> Meg.Burt@newmont.com. <br /> Sincerely, ( f r <br /> Meg Burt T s? /"J,E� ,-ti <br /> Environmental Manager <br />