Laserfiche WebLink
16mh-ert anti �Nssv tatrs <br />CONSULTING GEOTECHNICAL ENGINEERS AND MATERIAL TESTING <br />DAILY FIELD REPORT - FIELD DENSITY TESTS <br />Date: Monday, 2/15/16 <br />Arrive Time: 11:30 PM <br />Depart Time: <br />Project Name: RPE <br />Weather: Clear <br />Project Number: M16001MT <br />Temp: <br />Client: Mountain Coal <br />Client Representative: Ty Hyatt <br />General Contractor: <br />Supervisor: <br />Specialty Contractor: Beavers <br />Construction <br />Specialty Superintendent or Foreman: Bill Chesnik <br />Source of Fill Material: Wash plant <br />Plans and Specs: <br />Prepared by: Dated: <br />Contractor's Equipment Used: Haul trucks, dozer, loader <br />Lambert and Associates Equipment Used - Manufacturer: CPN Serial Number or Unit Number: 18 <br />Test Results were Verbally Given On-Site to: <br />Expected Conditions Observed: yes <br />Unexpected Conditions Observed: No <br />Unusual Conditions Observed: <br />If yes, who was contacted? <br />Follow-up from Prior Retests Performed: No <br />Visit: <br />Concerns for Next Visit: Retests Needed: No <br />Other personnel contacted on-site: name/firm <br />Notes: <br />1 performed nuclear field density tests as requested by Ty Hyatt of material being placed for fill on the RPEE and RPE. <br />Ty showed the technician the area that was prepared and ready for testing. Lambert and Associates' technician chose <br />the test locations within the area that was ready for testing. Please refer to the these results sheets for approximate test <br />locations and test results. The test results indicate only the relative compaction and soil moisture content of the material <br />tested at the elevation and location tested at the time of our site visit. <br />Lambert and Associates Technician: Hayes <br />