Laserfiche WebLink
JEanihiert anb �gsvritatts <br />CONSULTING GEOTECHNICAL ENGINEERS AND MATERIAL TESTING <br />DAILY FIELD REPORT - FIELD DENSITY TESTS <br />Date: Monday, 114/16 <br />Arrive Time: 12:15 PM <br />Depart Time: <br />Project name: RPE <br />Weather: Clear <br />Project Number: M16001MT <br />Temp: <br />Client: Mountain Coal <br />Client Representative: Ty Hyatt <br />General Contractor_ <br />Supervisor: <br />Specialty Contractor: Beavers <br />Construction <br />Specialty Superintendent or Foreman: Bill Chesnik <br />Source of Fill Material: Wash plant <br />Plans and Specs: <br />Prepared by: Dated: <br />Contractor's Equipment Used: Haul trucks,dozer, loader, excavator <br />Lambert and Associates Equipment Used - Manufacturer: CPN Serial Number or Unit Number: 18 <br />Test Results were Verbally Given Onsite to: Bill Chesnik <br />Expected Conditions Observed: yes <br />Unexpected Conditions Observed: No <br />Unusual Conditions Observed: <br />If yes, who was contacted? <br />Follow-up from Prior Retests Performed: yes <br />Visit: <br />Concerns for Next Visit: Retests Needed: No <br />Other personnel contacted on-site: nameffirm <br />Notes: <br />I performed nuclear field density tests as requested by Ty Hyatt of material being placed for fill on the RPE. Ty showed <br />the technician the area that was prepared and ready for testing. Lambert and Associates'technician chose the test <br />locations within the area that was ready for testing. Please refer to the these results sheets for approximate test <br />locations and test results. The test results indicate only the relative compaction and soil moisture content of the material <br />tested at the elevation and location tested at the time of our site visit <br />Lambert and Associates Technician: Hayes <br />