Laserfiche WebLink
REAGENT S-11194 Frother SDS: 0060705 Date Prepared: 04/14/2016 Page 4 of 9 <br /> Special Handling Statements: This material contains a flammable or combustible liquid and vapor. This is a <br /> research and development (R&D) sample. The chemical, physical, and toxicological properties of this material have <br /> not been fully investigated. Its handling or use may be hazardous. It may only be used for R&D purposes under the <br /> supervision of technically qualified individuals. <br /> STORAGE <br /> Areas containing this material should have fire safe practices and electrical equipment in accordance with applicable <br /> regulations and/or guidelines. Standards are primarily based on the materials flashpoint, but may also take into account <br /> properties such as miscibility with water or toxicity. All local and national regulations should be followed. <br /> In the Americas, National Fire Protection Association (NFPA) 30: Flammable and Combustible Liquids Code, is a widely <br /> used standard. NFPA 30 establishes storage conditions for the following classes of materials: Class I Flammable Liquids, <br /> Flashpoint<37.8 °C. Class II Combustible Liquids, 37.8 °C < Flashpoint<60 'C. Class Ilia Combustible Liquids, 60 °C < <br /> Flashpoint< 93 'C. Class Illb Combustible Liquids, Flashpoint > 93 'C. <br /> Storage Temperature: Room temperature <br /> Reason: Quality. <br /> 8. EXPOSURE CONTROLS/PERSONAL PROTECTION <br /> Engineering Measures: <br /> Utilize a closed system process where feasible. Where this material is not used in a closed system, good enclosure and <br /> local exhaust ventilation should be provided to control exposure. <br /> Respiratory Protection: <br /> For operations where inhalation exposure can occur, use an approved respirator recommended by an industrial hygienist <br /> after an evaluation of the operation. Where inhalation exposure cannot occur, no respiratory protection is required. A full <br /> facepiece respirator also provides eye and face protection. <br /> Eye Protection: <br /> Prevent eye and skin contact. Provide eye wash fountain and safety shower in close proximity to points of potential <br /> exposure. Wear eye/face protection such as chemical splash proof goggles or face shield. <br /> Skin Protection: <br /> Prevent contamination of skin or clothing when removing protective equipment. Wear impermeable gloves and suitable <br /> protective clothing. <br /> Hand Protection: <br /> Nitrile or fluorinated rubber gloves. Consider the porosity and elasticity data of the glove manufacturer and the specific <br /> conditons in the work place. Replace gloves immediately when torn or any change in appearance (dimension, colour, <br /> flexibility etc) is noticed. Barrier creams may help to protect the exposed areas of the skin, they should however not be <br /> applied once exposure has occurred. <br /> Additional Advice: <br /> Food, beverages, and tobacco products should not be carried, stored, or consumed where this material is in use. Before <br /> eating, drinking, or smoking, wash face and hands thoroughly with soap and water. <br /> Exposure Limit(s) <br /> The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure <br /> limit. At this time, the other constituents have no known exposure limits. <br /> No values have been established. <br /> 9. PHYSICAL AND CHEMICAL PROPERTIES <br /> Color: clear colorless to slightly yellow <br /> Appearance: liquid <br />