Laserfiche WebLink
which form the Twentymile Park basin. They cause the strata to dip in excess of 15 percent near the periphery of <br />the basin and form the outer boundaries of the mine area. The coal measures are also disturbed by northwest <br />striking normal faults. Detailed structure and Wadge Seam outcrop are shown on Map 6, Wadge Seam Structure. <br />Additional structural information, as well as lithologic information for both the Wadge and Wolf Creek seams are <br />shown on Maps 7, 8, 9, 9A, Figure lA Geologic Cross -Sections A -A', B -B', C -C', D -D', and E -E', and in Exhibit <br />53, Wolf Creek Geologic and Mine Plan Information. <br />Overburden depths in the planned permit area range from "outcrop" near the portal area, to approximately 1,700 <br />feet (Wadge Seam) and 1,850 feet (Wolf Creek Seam) in the central portion of the basin. This information is <br />presented on Map 10, Wadge Seam Overburden, and in Exhibit 53. <br />Stratigraphy & Physical Characteristics of the Coal Seam and Other Strata in the Area to be Mined <br />Generalized stratigraphy of the area is shown on Figure 2, General Stratigraphic column. Detailed site-specific <br />stratigraphy is shown on Map 6, Map 7, Geologic Cross -Sections A -A', Map 8, Geologic Cross -Sections B -B', <br />Map 9, Geologic Cross -Sections C -C', Map 9A, Geologic Cross -Sections E -E', Figure IA, Geologic Cross - <br />Sections D -D', and in Exhibit 53. It should be noted that the faults shown on the maps are of a regional character <br />and are outside of the PR 99-05 mine plan area. Map 23, Mine Plan, presents the faults that have been encountered <br />in the mine. The coal to be mined by the planned underground operations includes the Wadge and Wolf Creek <br />Seams. Both seams occur within a sequence of sedimentary rocks characterized by shales, claystones, mudstones, <br />siltstones, sandstones, and minor coal stringers in the Upper Cretaceous Mesaverde Group. This sedimentary <br />sequence is about 75 million years old and is composed of terrigenous clastics deposited in offshore, shallow, and <br />near -marine environments at the western edge of the epieric seaway. This seaway was located in interior western <br />North America during the latter part of the Early Cretaceous, and most of the Late Cretaceous, time. <br />The sandstones were formed in beach environments and are generally fine to fine-grained, of low porosity, and are <br />well -cemented. The very thick shale formations, such as the 650 -foot shale member below the Twentymile <br />Sandstone, are offshore marine deposits and are characterized by their lateral continuity, extremely fine-grained <br />nature, and extremely low horizontal and vertical permeability. <br />The youngest rocks exposed in the planned mine area belong to the massive marine -deposited Lewis Shale <br />Formation, which varies from zero to 700 feet in thickness. Near the base of the Lewis Shale is the Fish Creek <br />Seam, approximately four feet thick. Approximately 200 feet of interbedded shale, siltstone, and fine-grained <br />sandstone separate the Fish Creek Seam from the underlying massive Twentymile Sandstone. This interval is <br />locally referred to as the Holderness Member. <br />The Twentymile Sandstone is a key mapping unit and can be identified and traced throughout most of the Yampa <br />Coal Field. The rock immediately below the Twentymile Sandstone is another massive marine shale member: a <br />"tongue" of the Lewis Shale (Fig. 2). The thickness averages approximately 650 feet. <br />The Fish Creek Seam, Holderness Member, the Twentymile Sandstone, and the thick marine shale member make <br />up the majority of the upper Williams Fork Formation. The lower portion of the Williams Fork Formation consists <br />of the coal -bearing sequence. This sequence is the "Middle Coal Group" of the Mesaverde Group. The "Middle <br />Coal Group" contains the Lennox Seam, Wadge Seam, and the Wolf Creek Seams. <br />The Lennox Seam is located 10 to 15 feet below the marine shale member, and ranges in thickness from zero to four <br />feet. The low seam height, poor quality, and poor lateral continuity of the Lennox seam render it un -minable. In the <br />proposed mine area, the strata below the Lennox Seam consists mainly of stacked deltaic sequences. Four distinct <br />.>C:�U'v"1iVC:J iiuLC li:::.ti Ina.pped through t1ic pnin,v drba. ii2e: aic _haraVtun/_;d by a ;uai S::rllllg+ of iiiC:aii giaili JiLG <br />upwards within each sequence. The lithologies consist of mudstones and claystones, siltstones, and very fine-grained <br />interbedded sandstones. The combined thickness of these sequences range from sixty to ninety feet. These rocks <br />directly overlie the Wadge Seam, which is the primary target of the planned underground operations. <br />PR15-11 2.04-14 07/06/15 <br />