Laserfiche WebLink
HISTORY <br />March 28, 2016 <br />Tabetha N. Lynch <br />Environmental Protection Specialist <br />Division of Reclamation, Mining and Safety - <br />1313 Sherman St., Room 215 <br />Denver, Colorado 80203 <br />RECEIVED <br />A�� � 12016 <br />p�SION OF RECT101 <br />MINING AND SAF <br />Ery <br />Re: Trapper Kline (Permit No. C-1981-010), Technical Revision No. 116 (TRA 16) Annual Reclamation Report <br />(HC #67393) <br />Dear Ms. Lynch: <br />Thank you for your correspondence dated March 21, 2016 (received by our office on March 23, 2016) regarding <br />the above referenced permit revision. <br />After review of the documentation provided, it is our opinion that a finding of no historic properties affected is <br />appropriate for the proposed undertaking pursuant to 36 CFR 800.4(d)(1). <br />Should unidentified archaeological resources be discovered in the course of the undertaking, work must be <br />interrupted until the resources have been evaluated in terms of the National Register eligibility criteria (36 CFR <br />60.4) in consultation with our office pursuant to 36 CFR 800.13. Also, should the consulted -upon scope of the <br />work change please contact our office for continued consultation under Section 106. <br />We request being involved in the consultation process with the local government, which as stipulated in 36 <br />CFR 800.3 is required to be notified of the undertaking, and with other consulting parties. Additional <br />information provided by the local government or consulting parties might cause our office to re-evaluate our <br />eligibility and potential effect findings. Please note that our compliance letter does not end the 30 -day review <br />period provided to other consulting parties. <br />Thank you for the opportunity to comment. If we may be of further assistance, please contact Mark Tobias, <br />Section 106 Compliance Manager, at (303) 866-4674 or mark.tobiasgstate.co.us. <br />Sincerely, <br />tev�Tumer,AIJA <br />State Historic Preservation Officer <br />ST/mt <br />